verly6565

This is my attempt to make an install video of my android Tesla screen.
there are alot of bad units from CHINA CIRCULATING ,you get what you pay for ,so to not get one with wiring problems get it here in the link below
https://www.dentechmods.com/

There are 3 versions and I'll show you each one you have
1= The T3 (one with ****)
2=The px3
3=The px6
I have all 3 right now I'm on the px6 ,new video coming soon
heres there product ,in the USA
ill go over
in post 2 below you will see fixes
1-airbag fix
2-hazard button fix
3-air conditioning fix
4-steering wheel control fix
5-OEM camera wireing ,added to post 2
now ive been lucky i worked with Dentechmods.com android to send the correct harness via vin number
most of you take pictures and hope you get the right harness from ebay and overseas vendors.
If you have a bad unit i now how to fix most issues
6 PX6 Firmware update link ;
send email to this link to sergey and request a firmware update in link below

Sergey Kozlov
shivadest@mail.ru THIS IS THE EMAIL FOR NEW FIRMWARE ,MENTION (dennis) and he will take care of you
just message Sergey Kozlov and give info of your unit he will email you instructions it will look like this

Changes:

1. WiFi icon click is open WiFi settings
2. Added Online Update button to Apps — System apps list. Click to check Online Updates
3. Fixed 4-Zone button text for Climate window for Land Cruiser 200
4. AppVer is 20200324
5. Something else
You have to copy px6-1920x1080.zip to the root USB Flash (must be formatted as FAT32 file system).
After it You will get px6-1920x1080.zip (file must be named right that) at the root of USB Flash.
Unplug ALL USB sticks/drives and etc from unit,
0. Open App List, press Tesla PX6 Updater. Then select 1920x1080 (big or small display, use the one You used before) radio button and press Install. Wait until it closes.
1. Attach USB, You will see Information about Install Firmware Update.
2. Head Unit will be rebooting and firmware will be installing.
3. When all is done, You will see prompt about remove USB. Remove USB and HU goes to restart. Unplug USB while boot logo. to prevent repeat of install
then take a picture of your system, and then send it to him



Best regards,

Sergey Kozlov
shivadest@mail.ru
Dsp here

https://www.aliexpress.com/item/4001...1-cbde309ad90e





ill be installing the PX6 next to test it

WHEN ordering the PX6 MAKE SURE YOU SEND THIS PICK IF YOU HAVE A 2010-2011 AND VIN NUMBER SO THEY GIVE YOU THE CORRECT HARNESS ,IN THE PIC IT HAS ALL THE PLUGS YOU NEED
Here we have the px6 FIRST BOOT UP FIRMWARE UPDATE





factory back up camera introduction part-1
part 2 will be setting the old grungy looking camera to better contrast and brightness
part 3 will be wiring diagram ,very easy if you follow my easy steps, you dont need to run any wires to trunk




Google assistance working well (Ok Google)


air conditioner new display


Android Auto, Apple Carplay


Free maps ,no internet needed



Custom Logo


bacup camera parts list


part-2 monitors


Hazzard button fix


backup camera part 3


backup camera part 4 (for 2006 models)


Airbag Fix


2007-2009 backup camera


Q&A Video





Firmware update





so i called PHOENIX ANDROID they says they have a unit for the 2010-2011 with a fibre optic DSP AMP 12 channel 50 watts RMS OUTPUT
so i bought it,this one below ,not as fancy as the one above but better than my factory one
the one below was pricey ,but this was the only company which has a unit for 2006-2011 so i bit the bullet
and now im a happy camper



so i read on the blogs that members were having problems with the backup camera ,air bag light ,hazzard button not working
so i asked phoinex does these units have these problems, they said you would be the first with the 2010 unit and if you have any issues we will resolve it.
so i said lets take another chance on one of these units.
i plugged it in and it worked , but it had the airbag light on hazard button didn't work.
i called them and they said send me your old unit and we will probe the connections


so what they did was test all the components because the harness they sent was for chinese market
a week later they sent me a new harness all my problems solved
The best thing is the DSP amp..ill be doing a video on the amp

heres a link what it like ,exact same unit but phoenix android called it carda



this is the old amp



this is the new plug and play



you can use your laptop to tune each speaker or use the tesla screen




HERES THE THE TIRE PRESSURE GAUGE


then updated tweeters from this

to this



cables to run to the radio
now for the display
THIS IS THE UNIT











any question let me no,
this unit works beautifully

heres the order on phoenix androids site

verly6565

backup camera diagram for the 2006



At the back of your tesla sceen there should be a brown wire that says back connect that to pin 13 on the k46 plug

then remove glove box and find the k64 plug .and follow diagram

2007-2009 backup camera wiring





2010-2011





these to plug are behind the deck watch the video





The Security light fix =problem doesn't activate when you lock the doors


first remove lower plug from the Tesla unit


then locate the purple wire in tplug (theres 2) the one with the arrow pointed to it



then attach a wire to it and connect into **** 6 in the k99 plug green wire


now your done


This is the air conditiong fix






this how you add the brackets just drill to holes ,by using the template provided with the unit










This is the AIRBASG fix ,ask phoenix android for the 3 wire chip



you will get this







back in 2014 this was my first set up

verly6565

31 BAND DSP

bebe85

Looks great! Where did u find this set up? And did u have to replace the factory amp? I have an 06 gs with ML and am currently awaiting my replacement 6.5's for the doors. I'd love to do this as well.

verly6565

I got it from Phoenix Android
i did not have to replace the factory amp ,but on the web site it had an option for a DSP AMP,so i bought it with the screen
let me tell you the low bass makes you think you have a box in the trunk
What the amp has is a built in dsp sound processor so you can tune every speaker individually its incredible ,
when your tunning it comes on the screen ,you can use the presets or use youer own and save it and give it a file name
mind you all you do is go to your trunk yank out your factory amy and plug this in with the same cnnectors

you can also screen mirror easily and use the the tesla screen touchscreen

ive tried android auto and apple carplay and there a little laggy
the one in the unit mirrors your phone exactly





my next video will be me showing you how the functions work

bebe85

This sounds so exciting. Will be gluing this route soon. I'll keep an eye out for the videos

verly6565

A lot of the Tesla unit's were thrown on the market without testing for the us market, so I sent my unit so they could get it right.they worked with me to get a good product out to the us market. Off course not everything is perfect with aftermarket radios
But mine is working fabulous, I don't have to upgrade speaker's, I just tune them.but I did upgrade my tweeters

i worked with them to resolve alot of issues now they are great machines in your car








this is the order

bebe85

I can't seem tho find the amp on their website. When you have time , would u mind sharing the link please.

verly6565

Heres the link but you have to let the page load and theres a tab witch says color click on that a few time and the drop down will show it ...its very slow so you have to do it a few times

https://www.phoenixautomotiveinc.com...18502098976825






i dont think they no how much this amp is worth




so we will keep quiet about it

bebe85

Okay I see it now thank you for the help. I went on ahead and updated all my door speakers today tomorrow I will tackle the dash, and rear dash speakers. You wouldn't happen to know how many watts that amp is rated for?

verly6565

Heres the specs






best part you can save your space in the trunk and tune the rear sub for ultra low bass

bebe85

Thanks again. Will look into it.

verly6565

you have to see it in the car before you judge. Anything is better than the original unit , i bought the the first unit for $500 whitch was garbage ,this unit works and im happy with it ,i would PAY that money again not to have headaches like the others do...if your looking for home tv THIS IS NOT IT ! when i serviced my car with LEXUS 3 mechanics came to me asking about the unit, its impressive in every way
if you have the resolution to high it will lag ,black out and run like **** 1280x768 is perfect

verly6565

when tuning the set up you can use a laptop or use the tesla screen



my tweeters were also upgraded heres the new ones


these are the old

frostdaddy

Does your climate control work in Auto mode in °F?