GS - 4th Gen (2013-2020) Discussion about the 2013 and up GS models

How much slower AWD 350 than RWD in 1/4 mile

Thread Tools
 
Search this Thread
 
Old 07-26-21 | 10:06 AM
  #16  
Knucklebus's Avatar
Knucklebus
Instructor
 
Joined: Jan 2018
Posts: 1,158
Likes: 403
From: Kentucky
Default

By my rough calculations, I read an AWD GS as weighing 3980lbs. Those ET/MPH combos rank it between 270 and 285 wheel horsepower.

My spreadsheet says that your ET could have been 13.91 with everything perfect so that looks like you did quite well.

Next time, run with 1/2 a tank of gas and no spare tire/anything else you can dump. 100lbs is 0.10 second.
Old 07-26-21 | 10:16 AM
  #17  
mrplesh's Avatar
mrplesh
Pit Crew
 
Joined: Feb 2019
Posts: 244
Likes: 77
From: New Jersey
Default

Originally Posted by jgscott
Did you cut off traction control?
Traction off

Originally Posted by Knucklebus
By my rough calculations, I read an AWD GS as weighing 3980lbs. Those ET/MPH combos rank it between 270 and 285 wheel horsepower.

My spreadsheet says that your ET could have been 13.91 with everything perfect so that looks like you did quite well.

Next time, run with 1/2 a tank of gas and no spare tire/anything else you can dump. 100lbs is 0.10 second.
That was half a tank, but still had spare tire, and 50+ lbs of tools and other stuff.

My next time out I will cut excess weight, less fuel, and focus more on my driving

ALSO
I found the engine to heat soak badly with the engine cover on, so that was removed and hood opened to cool before runs 3 and 4. Monitoring trans, coolant, intake temps from OBD2 bluetooth
The following users liked this post:
Knucklebus (07-26-21)
Old 07-26-21 | 10:22 AM
  #18  
Knucklebus's Avatar
Knucklebus
Instructor
 
Joined: Jan 2018
Posts: 1,158
Likes: 403
From: Kentucky
Default

Originally Posted by mrplesh
Traction off



That was half a tank, but still had spare tire, and 50+ lbs of tools and other stuff.

My next time out I will cut excess weight, less fuel, and focus more on my driving

ALSO
I found the engine to heat soak badly with the engine cover on, so that was removed and hood opened to cool before runs 3 and 4. Monitoring trans, coolant, intake temps from OBD2 bluetooth
I would look for a way to override the radiator fans and let it cool down in the pits between runs.

An old racer trick was to put bags of ice on the intake. I haven't looked to see if our cars have the heated plenum/throttle body. Blocking that off will let cooler air in. For bonus points, connect up a cool can and circulate ice water through it.
Old 07-26-21 | 10:55 AM
  #19  
mrplesh's Avatar
mrplesh
Pit Crew
 
Joined: Feb 2019
Posts: 244
Likes: 77
From: New Jersey
Default

Originally Posted by Knucklebus
I would look for a way to override the radiator fans and let it cool down in the pits between runs.

An old racer trick was to put bags of ice on the intake. I haven't looked to see if our cars have the heated plenum/throttle body. Blocking that off will let cooler air in. For bonus points, connect up a cool can and circulate ice water through it.
I will be bringing my laptop next time with tech stream and forcing on electronically
The following users liked this post:
Knucklebus (07-26-21)
Old 07-26-21 | 11:30 AM
  #20  
Knucklebus's Avatar
Knucklebus
Instructor
 
Joined: Jan 2018
Posts: 1,158
Likes: 403
From: Kentucky
Default

Originally Posted by mrplesh
I will be bringing my laptop next time with tech stream and forcing on electronically
Also, running 5psi more in your front tires will make them roll easier. If it calls for 33, run 38 and they might help with your reaction time too.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mopudding
IS - 3rd Gen (2014-present)
31
09-08-17 07:39 PM
GymWarrior
IS - 2nd Gen (2006-2013)
23
08-31-09 03:27 PM
kuuqi
IS - 2nd Gen (2006-2013)
31
09-10-08 06:14 PM
clubaddict
IS - 2nd Gen (2006-2013)
13
08-05-06 11:44 PM
pmonag
IS - 2nd Gen (2006-2013)
22
05-11-05 09:43 AM



Quick Reply: How much slower AWD 350 than RWD in 1/4 mile



All times are GMT -7. The time now is 12:28 PM.