When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
4th and final version of my phone mount! SLS printed by Shapeways so it won't get all floppy in the heat lol. I made it to fit in the little nook to the left of the screen so it doesn't block it.
I used an adhesive magnetic mount, but I put in mounting holes too in case I want to change to a cradle or something else.
4th and final version of my phone mount! SLS printed by Shapeways so it won't get all floppy in the heat lol. I made it to fit in the little nook to the left of the screen so it doesn't block it.
I used an adhesive magnetic mount, but I put in mounting holes too in case I want to change to a cradle or something else.
4th and final version of my phone mount! SLS printed by Shapeways so it won't get all floppy in the heat lol. I made it to fit in the little nook to the left of the screen so it doesn't block it.
I used an adhesive magnetic mount, but I put in mounting holes too in case I want to change to a cradle or something else.
View from driver's position.
Is this a thick layer of dust and dirt on your steering column and instrument cluster?
Haha, yes my car is a bit dusty, I admit I should wipe it down more often. It's been about 100F daily recently so I haven't washed the car in 2 weeks or so.
Here's a pic with the phone mounted.
I've listed the mount on Shapeways for those of you who asked. I apologize that it costs so much, most of it is Shapeway's cost to print it, I'm making about $3 per mount. Maybe I can recoup some of the costs of printing the previous 3 versions and the dash scanning. https://www.shapeways.com/product/YS...one-dash-mount
been throug most of this thread. still looking for the silver bullet... for me all is still a compromise . My phone for now stays in the center console!
I agree that this is the best spot for a cellphone , as far as maintaining the visibility of the main screen, access to AC controls and accessing the phone. But I'm not entirely loving the felt and gray-brown finish. However, the more I look at it, the more I feel that I will probably get one.
Originally Posted by DuB
View from driver's position.
This was my second choice to mount the phone, but it's really too far away to be useful.
Haha, yes my car is a bit dusty, I admit I should wipe it down more often. It's been about 100F daily recently so I haven't washed the car in 2 weeks or so.
Here's a pic with the phone mounted.
I've listed the mount on Shapeways for those of you who asked. I apologize that it costs so much, most of it is Shapeway's cost to print it, I'm making about $3 per mount. Maybe I can recoup some of the costs of printing the previous 3 versions and the dash scanning. https://www.shapeways.com/product/YS...one-dash-mount
Let me know if you have any feedback!
What's the difference between the Black Natural and Black Premium versions?
The one pictured is the black natural finish. It's basically straight out of their printer and then dyed. The premium one is smoother but it's crazy expensive. The extra cost is all Shapeways, I make $3 off either one. Thanks for the order
The one pictured is the black natural finish. It's basically straight out of their printer and then dyed. The premium one is smoother but it's crazy expensive. The extra cost is all Shapeways, I make $3 off either one. Thanks for the order
If only you had a 3D printer, it's an excellent design great job. Do you still own the design or do they own it now?
Yeah, if I had my own printer I'd be able to prototype it faster and cheaper. I use a local shop to print the prototypes using an FDM printer, but those models can't be used in a car because the intense heat causes them to warp (ask me how I know haha). Shapeways uses $1mil SLS printers that use a laser to fuse each layer, and the resulting print is almost like an injection molded part and won't warp in a hot car. Yeah I still own the design.
I have been using the Macally Adjustable Automobile Cup Holder a really like it. http://a.co/6x3m5Xt
It does take up one cup holder but since its usually just me driving and its easily removable I don't mind at all. Things I like about it is its very secure (cornering) and low profile so it doesn't block anything essential. The phone sits right above the mouse pad so its very easy to use (literally lift a finger from mouse pad) if needed and no more distracting than glancing at the radio if your using google maps. I like the Pro Clips product but it looks like it blocks part of the infotainment display on the GS. I personally wouldn't attach anything to the CD player or vents as I think this will either eventually damage your car or phone or both.
I'm going to try the ALIGHTSTONE CD Slot mount in my 2015 GS, and I'm also interested in the Macally. I see there is a regular version, and long / extra long neck versions. Would you still recommend the regular version?
08-03-18 | 10:31 AM
. My phone for now stays in the center console!
