Black F-Sport with Tanabe Springs
#16
Rookie
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Front 20x9 offset 32
Rear 20x10.5 offset 45
Tires - Michelin Pilot Super Sport
Front 245/35/20
Rear 285/30/20
Lowering Springs - Tanabe NF-210
No rubbing and I didn't have to make any modifications. My personal opinion here, I want to quantify that im certainly no tire expert, but if you can get 285s on there do it. Again my opinion, but even my 285 Michelins looked just a little "stretched" and the wider you could go the better. hope it works out for you.
I see you're in Orlando, Im in Tampa and if you're worried about fitment try the discount tire guys out. I have no affiliation to DT but I drive the 40 miles to the Lakeland Discount Tire store because DT always seem to go out of their way make their customers happy. Just bought some 35x12.50x20 Nitto trail grapplers for my Tundra that I just had a 6" lift put on. The shop that did my lift wanted to sell me tires also but im just loyal to DT these days. Anyway I want to change the stock 20" wheels and wrap my Nittos around some Fuel drillers 20x12 44 offset which is a very aggressive setup for the tundra and the discount tire guys have already ordered the wheels for me and we are going to test fit this weekend. Even the guys at Fuel said we may need to do some work to get those wheels on and the DT guys are going to help me out. Not sure how many shops would test fit wheels and tires for you
#17
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Wheels - Vossen Matte Graphite CV3
Front 20x9 offset 32
Rear 20x10.5 offset 45
Tires - Michelin Pilot Super Sport
Front 245/35/20
Rear 285/30/20
Lowering Springs - Tanabe NF-210
No rubbing and I didn't have to make any modifications. My personal opinion here, I want to quantify that im certainly no tire expert, but if you can get 285s on there do it. Again my opinion, but even my 285 Michelins looked just a little "stretched" and the wider you could go the better. hope it works out for you.
I see you're in Orlando, Im in Tampa and if you're worried about fitment try the discount tire guys out. I have no affiliation to DT but I drive the 40 miles to the Lakeland Discount Tire store because DT always seem to go out of their way make their customers happy. Just bought some 35x12.50x20 Nitto trail grapplers for my Tundra that I just had a 6" lift put on. The shop that did my lift wanted to sell me tires also but im just loyal to DT these days. Anyway I want to change the stock 20" wheels and wrap my Nittos around some Fuel drillers 20x12 44 offset which is a very aggressive setup for the tundra and the discount tire guys have already ordered the wheels for me and we are going to test fit this weekend. Even the guys at Fuel said we may need to do some work to get those wheels on and the DT guys are going to help me out. Not sure how many shops would test fit wheels and tires for you
Front 20x9 offset 32
Rear 20x10.5 offset 45
Tires - Michelin Pilot Super Sport
Front 245/35/20
Rear 285/30/20
Lowering Springs - Tanabe NF-210
No rubbing and I didn't have to make any modifications. My personal opinion here, I want to quantify that im certainly no tire expert, but if you can get 285s on there do it. Again my opinion, but even my 285 Michelins looked just a little "stretched" and the wider you could go the better. hope it works out for you.
I see you're in Orlando, Im in Tampa and if you're worried about fitment try the discount tire guys out. I have no affiliation to DT but I drive the 40 miles to the Lakeland Discount Tire store because DT always seem to go out of their way make their customers happy. Just bought some 35x12.50x20 Nitto trail grapplers for my Tundra that I just had a 6" lift put on. The shop that did my lift wanted to sell me tires also but im just loyal to DT these days. Anyway I want to change the stock 20" wheels and wrap my Nittos around some Fuel drillers 20x12 44 offset which is a very aggressive setup for the tundra and the discount tire guys have already ordered the wheels for me and we are going to test fit this weekend. Even the guys at Fuel said we may need to do some work to get those wheels on and the DT guys are going to help me out. Not sure how many shops would test fit wheels and tires for you
#18
Rookie
iTrader: (2)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
As promised, here are the specs
Wheels - Vossen Matte Graphite CV3
Front 20x9 offset 32
Rear 20x10.5 offset 45
Tires - Michelin Pilot Super Sport
Front 245/35/20
Rear 285/30/20
Lowering Springs - Tanabe NF-210
Calipers - Painted (not powder coated) Sticker - motogfx
Wheel Repair - WheelTec in Tampa
I want to say thanks to terrycs and everyone in his spreadsheet. I used that doc as my guide in this project
Adding more pics later in the thread
Wheels - Vossen Matte Graphite CV3
Front 20x9 offset 32
Rear 20x10.5 offset 45
Tires - Michelin Pilot Super Sport
Front 245/35/20
Rear 285/30/20
Lowering Springs - Tanabe NF-210
Calipers - Painted (not powder coated) Sticker - motogfx
Wheel Repair - WheelTec in Tampa
I want to say thanks to terrycs and everyone in his spreadsheet. I used that doc as my guide in this project
Adding more pics later in the thread
#20
Rookie
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I haven't had any issues with rubbing at all. I don't put many miles on my car since I travel for work during the week. 2013GS350, im curious, are your front and rear tires both wearing out? where are your tires wearing out? in my '06 GS350 the inner part of my tires wore out much faster than the rest of the tire. Also, what tire pressure are you running?
Thread
Thread Starter
Forum
Replies
Last Post
jmtamu
GS - 4th Gen (2013-2020)
32
05-17-14 07:03 AM