What are the best looking front lip kit for our 13-15 GS 350 F-Sport?
07-02-18, 02:47 PM
#34
Almost.. the TRD is more of a winglet style front lip so it's just two pieces that just go over into the opening gap on the front bumper.
The Wald front lip is more of a complete lip that goes across the whole bumper.
I paid about $580 for mine and I sourced them on my own directly from Japan.
The Wald front lip is more of a complete lip that goes across the whole bumper.
I paid about $580 for mine and I sourced them on my own directly from Japan.
The following users liked this post:
eddie420 (07-02-18)
07-02-18, 04:53 PM
#35
Almost.. the TRD is more of a winglet style front lip so it's just two pieces that just go over into the opening gap on the front bumper.
The Wald front lip is more of a complete lip that goes across the whole bumper.
I paid about $580 for mine and I sourced them on my own directly from Japan.
The Wald front lip is more of a complete lip that goes across the whole bumper.
I paid about $580 for mine and I sourced them on my own directly from Japan.
12-04-18, 08:31 PM
#40
Lead Lap
I have the L-Style lip from the same seller above and to me, the quality is great considering the price point: https://www.clublexus.com/forums/gs-...-bumper-3.html
12-04-18, 08:35 PM
#41
Lead Lap
I think any of the vendors on the forum can likely source it for you but $580 thats a hell of a great price! I worked with Steve from Japan Tuned Parts recently on some very small items which were shipped directly to me from Japan...here's their link to the TRD lip: http://www.japantunedparts.com/produ...-30006-00b.htm
12-04-18, 08:38 PM
#42
Pole Position
One that doesn't get nearly enough love and what I went with is the Think Design front lip. Fills in the front perfectly without increasing the already larger nose of the car.
12-04-18, 10:15 PM
#43
Lexus Fanatic
Just type in SK style Lexus GS350, you will see tons of them on ebay, Amazon has it too, they are cheap, quality is just okay to kind of bad, lot of rough areas. I have one, going to try to put it on my non F sport but I am already seeing there will be fitment issues on the sides and will likely have to do some cutting and filling in to get it to fit which is disappointing, fitment on the sides to the wheel well is pretty poor. There are no holes in the wheel well either, no sure how you attach at the wheel well unless you drill some holes in the wheel well but it is too flimsy to really hold anything tight if you do it. I guess 3M tape will be needed in a lot of areas to fortify it and try to get it solid.
12-05-18, 12:23 AM
#44
Driver School Candidate
12-05-18, 01:08 PM
#45
The following users liked this post:
GSXR7 (10-03-19)