When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I had these on my IS and when I traded for the GS, the GS didn't have 'em. It was my first time installing anything like this and it was easier than i thought. It cost me around $250 and installed it myself (dealership wanted almost as much to install them).
This was the cheapest place I could find with shipping use code FALL19 for a discount on shipping. Install is very easy, I followed another thread on here and takes about 15 mins per side for the front. The backs are 1 min per side
You have a link handy by any chance?
Originally Posted by jonathancl
I got my sills on ebay too. Silly cosmetic upgrade, but I really like the glow when I open my door.
Always loved when I see a car with these. I needs these on mine now.
Re-Installed my Beat-Sonic Apple Car play /Android auto unit ,also installed my carbon fiber shift **** i got from Elvin, while i was in Singapore last month.
Last edited by superboy74; 10-26-19 at 09:35 PM.
Reason: change
Re-Installed my Beat-Sonic Apple Car play /Android auto unit ,also installed my carbon fiber shift **** i got from Elvin, while i was in Singapore last month.
@superboy74 Did you have the Aux problem like I did, Beatsonic emailed me the fix, or did you take it out for some other problem before? Also curious were did you mount your unit?
Yes Peasodos, I had the same issue of that humming sound coming from the aux. I just saw that you posted the fix right after i just i did the re-install, but used a ground loop noise isolator adapter which worked. As to where i installed it , the smaller unit next head unit and the larger one on the module on the right. I tried putting the 2 units together and using the area next to the module but it was too tight.
Changed by headlight bulbs as the driver side was going out after 88k miles. Took my time, took off the plastic covers in the engine bay for top access as well as removing the driver side panel in the wheel well as well as the entire passenger side wheel well cover. A bit of a pain but saved the $120 the dealer would have charged for install plus experienced the satisfaction of doing the job myself.
tried to remove my rear camber arms to install spc arms and that thing is almost impossible to get out. no clearance what so ever. will try again after my back and neck heals lol
Got the Viper remote start installed. It was 550 + tax with installation included from a local Viper authorized dealer. It works with the OEM keyfob (3 x lock button) and also from the Viper smartstart app. The remote start came in handy as it started to snow today in Chicago!
10-24-19, 05:09 PM
