What did you do to your GS today?
#4771
Lexus Test Driver
No, I got it! I made sure I got all the deals available. Just a hair under $1600 OTD without warranty from America's Tire (Discount Tire). Warranty is another $200+ and I have time to think about this first. My stock tires didn't come with a warranty anyway.
#4772
#4773
Lexus Test Driver
Well the majority of that is from the dealer tech that just ripped stuff apart and didn't know how to put it back properly. I learned my lesson the real hard way. Never again! lol
#4775
Lexus Test Driver
#4776
This month will be 4 years with the GS. 35,880 miles, and I've never touched the brakes. Decided to pull the Akebonos out of staorage and slap them on. Thought I had a shim kit as well but could not find it so used the shims that came with the pads, and a small amount of brake grease. When I was done, I decided to change the oil as well... it's been a little over 7K miles. Also removed the fumoto oil drain valve and installed the Valvomax drain valve.
Old Pads... barely there after 36K miles.
Old Pads
New Pads
Rotors appear to still be in good shape.
Oil drain valves - Fumoto vs Valvomax
Old Pads... barely there after 36K miles.
Old Pads
New Pads
Rotors appear to still be in good shape.
Oil drain valves - Fumoto vs Valvomax
#4777
Lexus Test Driver
Mine looks like that after 22K miles.
The following users liked this post:
lexus4jess (09-08-22)
#4778
Lexus Champion
iTrader: (1)
This month will be 4 years with the GS. 35,880 miles, and I've never touched the brakes. Decided to pull the Akebonos out of staorage and slap them on. Thought I had a shim kit as well but could not find it so used the shims that came with the pads, and a small amount of brake grease. When I was done, I decided to change the oil as well... it's been a little over 7K miles. Also removed the fumoto oil drain valve and installed the Valvomax drain valve.
Old Pads... barely there after 36K miles.
Old Pads
New Pads
Rotors appear to still be in good shape.
Oil drain valves - Fumoto vs Valvomax
Old Pads... barely there after 36K miles.
Old Pads
New Pads
Rotors appear to still be in good shape.
Oil drain valves - Fumoto vs Valvomax
#4781
Lexus Test Driver
Chin, what's going on with the caliper decals there? Seems like there's another clear layer on top? I want that, it looks nice, like molded and painted.
#4782
And I only used the brake lube very sparingly, applied to the back of the shim, the retainer pin and bracket. I hope the quiet lasts.
Last edited by chinee; 09-03-22 at 08:30 PM.
The following users liked this post:
jgscott (09-03-22)
#4783
Edit: @ItzFilyO Just checked your pics and you've got decals on as well. The "molded" look is probably just from the angle I took the pic. I did nothing special.
Last edited by chinee; 09-03-22 at 08:34 PM.
#4784
Lexus Test Driver
I think the clear coat spray makes it look like it's one piece with the caliper from an angle. I think we have the same decals, it's just that mine isn't clear coated.
I just wish the stock wheel spokes are thinner so we can see the calipers more.
I just wish the stock wheel spokes are thinner so we can see the calipers more.