When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
A slew of people have messaged me asking where this project stands. The gist of it is that most of the connectors I ordered from China and Japan are either on a slow boat or stuck in customs. I have all the parts I need. In the mean time, I have been creating the harness which is going pretty well. Until I can get those connectors landed at my door step, I can't make any more progress.
Wow, I guess the power trunk retrofit will be a piece of cake compared to this. I guess this means the dash has to come out again?
I was planning on doing that this weekend and I still might but you probably saw the snow we got hit with today... got 8 inches pretty quickly. If I am in the mood after clearing my driveway I will do it. And no, if anything I will create a new hole in the firewall rather than screwing around with factory harness. Since I have warranty I want to keep electrical portion as stock as possible.... you know..just in case lol
Eddie - Justin may be able to help you obtain that hard to find connector you're looking for...
No, the connector I am looking for is not something he needed for his connections. Plus he bought his wiring harness along with all the other parts so it was easier for him to make his connections.
Originally Posted by Justin0807
If your car is GS350 then you will not have All speed radar cruise
gs450h only
Yes, GS350 does not have all speed, only down to 37km/h lol. It's okay I don't mind.
@Justin0807 I am not installing the Lane Recognition Camera, just the Driver Monitor and DRCC. But good job on hooking it up.
@bclexus The connector I cannot find is for the Driving Support ECU Assembly (p/n 90980-12708). I will need to probably buy a harness that has it already and re-use it.
You didn't need the driver monitor camera, that's mounted to the steering wheel?
Please list the parts you installed and more info on the custom wiring you did.
11-15-18, 06:02 PM
Did you make the harness for the lane recognition camera or did you buy it?
