When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
i used a switch I had laying around.
any small SPST switch will do, here is one similar to one I used:
SPST Toggle Switch Wires On/Off Metal Mini Small Automotive/Boat/Car/Truck https://www.amazon.com/dp/B078825ZQH..._7V5eCb8195945
It connects to the Dark blue wire on the T harness and other side of switch to any ground.
I chose not to tie up the module inside the dash and left it out so I can easily get to it to change options if I wanted to, without having to unbutton the dash again. There is a nice pocket to the top left of the foot rest which worked perfectly.
Sorry for bringing this back to life but I just installed an EVO-ALL with the T-Harness onto my 2016 GS and I connected all 3 wires that tap into CAN Hi & Lo and also start button and when I hit the lock button on the remote 3 times nothing happens. Tried reprograming it and the LED confirms with rapid blue flashing that the unit is programmed and the unit still does nothing. I got in touch with Fortin and they said to try a different firmware version. Just wanted to know what firmware version you used on your EVO-ALL for it to work? Thanks.