Kmoye79

Need spacers what size to be flush and will it effect my car? Getting new tires tomorrow and I want the spacers with out having to order if possible... North Carolina..

np20412

I am running 20mm rear and tires are almost fully flush. 25mm would probably do it. 15mm for fronts is what I've read across the forum. You'll need longer studs probably for the rear (not sure about front) unless you are planning to use a hub style one with its own studs.

This is with stock F sport 19s.

Kmoye79

20mm will work without doing any mods?

Selahvie

jonathancl

H&R DRM Spacers have their own studs, no need to worry about length.
front: 15mm 3065602
rear: 20mm 4065600

Looks like this:

baconRx

do the front stock studs need to be shortened?

Kmoye79

Thanks guys for the feed back a big help can't wait to get them on...

baconRx

do you have a specific brand you're putting on?

Kmoye79

I here H&R was the better brand so I think I'm going with that

np20412

Mine are H&R

Kmoye79

Is it something I cant install any mods have to be done like cut off studs????

dTxworld

for you guys who have installed 15mm up front - did you have any rubbing? I recently installed 15mm's and their is minor rubbing when half locked right/left...

TOPENDMS

15mm is usually the way to go in order to avoid rubbing. If you want 20mm, I have a full set of Eibachs that were test fit then removed. I will sell them for $200

Here's the H&R TRAK+ DRM Wheel Spacers .. they are from the RAV4 application.

dTxworld

That's what I understood as well but mine are slightly rubbing for some reason. Stock rim, stock tire, just lowered on RSR coils and extended studs that came with the HRs... Any ideas why?

HontoKuro

That's your answer.