Carbon Fiber Rear Diffuser + Quad Muffler Tips from Aliexpress?
09-05-19, 07:16 AM
#33
Yeah, I found it cheaper on eBay (without the tips). It's from the same company.
https://www.ebay.com/itm/Carbon-Fibe...oAAOSwZexdEbej
https://www.ebay.com/itm/Carbon-Fibe...oAAOSwZexdEbej
09-05-19, 07:27 AM
#34
Driver
Thread Starter
09-05-19, 08:01 AM
#35
09-05-19, 12:41 PM
#36
The following users liked this post:
RichardB23 (09-05-19)
09-05-19, 02:56 PM
#37
Driver School Candidate
09-30-19, 03:29 AM
#41
Driver
Thread Starter
Just wanted to give you guys an update since it's been 4 weeks since I ordered it.
I spoke to them 1.5 weeks ago and they said it should've been able to ship out by the end of last week, but it didn't. Emailed them again just now and it seems like they are on vacation this entire week for China's Golden week. They also had days off mid September for the Mid Autumn Moon Festival. Looks like it won't ship out until week 5.. maybe later. And I probably won't get the diffuser for another 2 weeks after it ships, so all in all I'm estimating 7 weeks for the total time.
Looks like I just ordered it at a bad time with all these holidays so close together.
I'll post back when the diffuser ships.
I spoke to them 1.5 weeks ago and they said it should've been able to ship out by the end of last week, but it didn't. Emailed them again just now and it seems like they are on vacation this entire week for China's Golden week. They also had days off mid September for the Mid Autumn Moon Festival. Looks like it won't ship out until week 5.. maybe later. And I probably won't get the diffuser for another 2 weeks after it ships, so all in all I'm estimating 7 weeks for the total time.
Looks like I just ordered it at a bad time with all these holidays so close together.
I'll post back when the diffuser ships.
The following 2 users liked this post by AsianxWu:
RichardB23 (09-30-19),
thisguy_06 (09-30-19)
10-01-19, 05:04 AM
#42
Driver
Thread Starter
Another update:
It looks like they finished making it yesterday, but can't ship it out yet due to their national holiday. They sent me pictures of the finished product. One of the fins didn't look straight and I emailed them about my concerns and am waiting for a reply (probably by tomorrow).
Even though the diffuser is a little late, I'm very impressed by their customer service and speed of their updates/replies.
It looks like they finished making it yesterday, but can't ship it out yet due to their national holiday. They sent me pictures of the finished product. One of the fins didn't look straight and I emailed them about my concerns and am waiting for a reply (probably by tomorrow).
Even though the diffuser is a little late, I'm very impressed by their customer service and speed of their updates/replies.
The following 2 users liked this post by AsianxWu:
NickMayer (10-01-19),
RichardB23 (10-01-19)
10-01-19, 09:39 AM
#43
You would need an exhaust shop to do some custom work to get the exhaust tips to line up correctly. Just cutting the end and slapping on the tip with a clamp probably won't work.
Yes the diffuser would fit all years of the 4gs, bumper is the same. That is a really nice diffuser for the price, why not buy it and let us know how it goes
Yes the diffuser would fit all years of the 4gs, bumper is the same. That is a really nice diffuser for the price, why not buy it and let us know how it goes
10-09-19, 03:45 AM
#44
Driver
Thread Starter
Week 5 update:
They finally responded with my concerns about the bent fins. They claim it's straight and it was due to the angle in which the photos were taken. I then asked when it would be shipped and they have yet to answer. They usually reply within 1 business day, but they didn't reply today. Going to have to wait until ~4am tomorrow to see if they reply.
Maybe I'm just being impatient, but this is turning into a headache. They said it would be in my hands by the end of Sept / first week of Oct.
I wanted to clear coat it and install it before it gets too cold and the time frame is shrinking.
They finally responded with my concerns about the bent fins. They claim it's straight and it was due to the angle in which the photos were taken. I then asked when it would be shipped and they have yet to answer. They usually reply within 1 business day, but they didn't reply today. Going to have to wait until ~4am tomorrow to see if they reply.
Maybe I'm just being impatient, but this is turning into a headache. They said it would be in my hands by the end of Sept / first week of Oct.
I wanted to clear coat it and install it before it gets too cold and the time frame is shrinking.
The following 2 users liked this post by AsianxWu:
dTxworld (10-09-19),
RichardB23 (10-09-19)
10-09-19, 11:22 AM
#45
Pole Position
Week 5 update:
They finally responded with my concerns about the bent fins. They claim it's straight and it was due to the angle in which the photos were taken. I then asked when it would be shipped and they have yet to answer. They usually reply within 1 business day, but they didn't reply today. Going to have to wait until ~4am tomorrow to see if they reply.
Maybe I'm just being impatient, but this is turning into a headache. They said it would be in my hands by the end of Sept / first week of Oct.
I wanted to clear coat it and install it before it gets too cold and the time frame is shrinking.
They finally responded with my concerns about the bent fins. They claim it's straight and it was due to the angle in which the photos were taken. I then asked when it would be shipped and they have yet to answer. They usually reply within 1 business day, but they didn't reply today. Going to have to wait until ~4am tomorrow to see if they reply.
Maybe I'm just being impatient, but this is turning into a headache. They said it would be in my hands by the end of Sept / first week of Oct.
I wanted to clear coat it and install it before it gets too cold and the time frame is shrinking.