When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
They just shipped it! They're estimating 7-20 days, which again is longer than what they initially told me. (2-3 weeks for production, 1-2 weeks for shipping).
That'll probably bring us into November. Hopefully it's not too cold to clear coat it, or I'll have to go to a shop if it is since I don't have a temperature controlled space to paint.
Diffuser arrived! Took about 7 days to get here (I'm honestly impressed). However, I'm pretty upset about the quality. I checked the fin I had a concern with and it is in fact bent. One of the fins was also scuffed. Lastly, and this isn't a huge deal, the weave is messed up on a few areas. Please see photos:
Edit: Also no mounting holes, so I guess I'm supposed to drill my own?
Bring the issue up with the seller, get some compensation for it. Then sand/buff, ceramic coat to fix it yourself. You'll hardly notice that weave since it''s facing downwards when it on the car.
I'm not 100% sure, but don't want to risk ruining them to find out haha.
if you can feel the edge of the letters with your fingernail, it's most likely a decal, I doubt they painted it on. if that's the case warmed up with a heat gun you should be able to peel it of fairly easily.
if you can feel the edge of the letters with your fingernail, it's most likely a decal, I doubt they painted it on. if that's the case warmed up with a heat gun you should be able to peel it of fairly easily.
There definitely is a difference in elevation between the letters and carbon fiber, but there are no hard edges to them. Nowhere that catches my fingernail.
10-11-19, 03:14 AM
