gsfwin

I'm looking to get some aftermarket 19s. I know most are running 20 in wheels. I don't plan on rolling fenders or do any camber adjustments. Im looking for a tucked or flush fitment without any rubbing issues. I know most are doing +45 10.5 in rear and +38 9 in front staggered. What are good tire sizes without stretching? Thanks in advanced.

oldwineguy

What are you going to lowered on? I am 20x9 +35 245/35 and 20x10.5 +45 275/30 on air. Fronts rub a little, no camber arms, no rolling or cutting of fenders

gsfwin

I'm going to lowered on coilovers. I do plan on using rear camber arms to get back into spec and not anything more negative.

gsfwin

How low are you driving it?

veez81

I have 19x8.5+38 and 19x9.5 +42 on the stock 235/265 tires and no rubbing or fender work was necessary. dropped on swift springs, so not aggressive at all. wheels are slightly tucked.

gsfwin

Any pictures?

oldwineguy

I have a finger gap front and back

veez81

I’ll get you some tomorrow.

gsfwin

Were you able to get your alignment back to spec?

TarmacSL3

I am running 19x8.5 +30 and 19x9.5 +42 with the stock 235/40 & 265/35, dropped on RSR Downs, no fender work and No rubbing. I also have SPC Rear camber arms and was able to get the rear camber in spec.

veez81

gsfwin

Looks good! That blue !!

gsfwin

Second picture looks aggressive

IntrinoX

iTrader: (1)

I'm running 20x9/10.5 +30/+42 on coils, and I rub like no other, but who cares about rubbing..

gsfwin

I already have a rattle I can't figure it. Rubbing would drive me insane.. Lol