Carbon Fiber Rear Diffuser
#1
Driver School Candidate
Thread Starter
Carbon Fiber Rear Diffuser
https://www.alibaba.com/product-deta...29c33874iP7SYg
Would this fit on Non F-Sport 2013 GS350?
It say's F-Sport only but I thought there was no difference in rear bumper, only front.
Would this fit on Non F-Sport 2013 GS350?
It say's F-Sport only but I thought there was no difference in rear bumper, only front.
#2
Lexus Test Driver
iTrader: (1)
F-sport and non f-sport have the same exact rear bumper. Also there is another thread were someone bought the plastic version of this diffuser and had trouble getting it to sit flush even after modification. Might be worth a try.
Last edited by peasodos; 11-18-19 at 11:54 PM.
The following users liked this post:
gefax (11-18-19)
#3
i have an abs version of this, if you look in the picture you will notice its missing the side and top mounting tabs. these would have to be fabricated, making install a little more work than i would like. there is a new aimgain copy on ebay now for 120ish, that looks promising.
#4
Driver School Candidate
Thread Starter
i have an abs version of this, if you look in the picture you will notice its missing the side and top mounting tabs. these would have to be fabricated, making install a little more work than i would like. there is a new aimgain copy on ebay now for 120ish, that looks promising.
#5
Lexus Test Driver
iTrader: (1)
i have an abs version of this, if you look in the picture you will notice its missing the side and top mounting tabs. these would have to be fabricated, making install a little more work than i would like. there is a new aimgain copy on ebay now for 120ish, that looks promising.
I'm not a big fan of how the fins point strait downwards, Aimgain has is a angle to it, but then again the ebay one is only $120.
#6
Lexus Test Driver
iTrader: (1)
Use to be $120, looks like they raised the price $10:
https://www.ebay.com/itm/Fits-13-19-Lexus-GS350-GS450h-Rear-Bumper-Lip-Diffuser-3-Fins-Unpainted-PP/113534115655?fits=Make%3ALexus&epid=21027770890&hash=item1a6f291f47:gZsAAOSws~pcNa~d
I also asked a couple months ago, they don't sell the carbon fiber version of it even though that's the one in the main listing picture. probably worth asking them again.
https://www.ebay.com/itm/Fits-13-19-Lexus-GS350-GS450h-Rear-Bumper-Lip-Diffuser-3-Fins-Unpainted-PP/113534115655?fits=Make%3ALexus&epid=21027770890&hash=item1a6f291f47:gZsAAOSws~pcNa~d
I also asked a couple months ago, they don't sell the carbon fiber version of it even though that's the one in the main listing picture. probably worth asking them again.
Trending Topics
#10
Lexus Test Driver
iTrader: (1)
The one I posted is the Aimgain Replica, here is a pic of the real one.
This is on the RC F but a square exhaust setup would be cool on the GS, reminds me of Mercedes AMG tips
Last edited by peasodos; 11-19-19 at 02:10 AM.
#11
yes, aimgain needs to make one just like the rcf for the gs!
Thread
Thread Starter
Forum
Replies
Last Post
corradoMR2
RX - 3rd Gen (2010-2015)
67
01-22-24 04:27 PM
khoab88
2Gen IS250 / IS350 / IS-F Classifieds (06-13)
8
08-09-10 10:38 PM