Why are the OEM rear Rotors more expensive than the front?
#1
Why are the OEM rear Rotors more expensive than the front?
I thought this was odd, considering the front rotors are much heavier and thicker. All in $380.45 shipped to my door, discount parts monster seems to have the best price shipped. I already have the pads and shims purchased some time ago, plan on doing full brake job myself in a few months. These part numbers are for my 2013 GS 450h, might be different for your car. the front rotors are 69.24 each and the rears are $86.46. The front/rear pads and shim sets I paid $186 a while ago. So $566.45 in parts for a full front and rear brake job is not bad at all with oem parts.
Last edited by peasodos; 01-27-20 at 03:07 AM.
#2
I paid $100 for my economy seat. The guy to the right paid $150. The guy to my left paid $75. Why? That's just how business is done.
Seriously, no idea why Lexus made the rear brakes more expensive. Perhaps the front rotors are shared with another car so it's cheaper to source. Could be anything. They just do what they do.
Seriously, no idea why Lexus made the rear brakes more expensive. Perhaps the front rotors are shared with another car so it's cheaper to source. Could be anything. They just do what they do.
#4
They are pretty much "lifetime" rotors since its a Hybrid. They go for a very long time -- Had a Prius many years ago with over 100k on the odometer -- the front rotors were still like new and the pads still had quite a bit more than 50% left. Of course, it's also dependent on the driver. Two-feet drivers will probably wear out their brakes much earlier.
The following users liked this post:
Im2bz2p345 (01-27-20)
#5
They are pretty much "lifetime" rotors since its a Hybrid. They go for a very long time -- Had a Prius many years ago with over 100k on the odometer -- the front rotors were still like new and the pads still had quite a bit more than 50% left. Of course, it's also dependent on the driver. Two-feet drivers will probably wear out their brakes much earlier.
#6
Racer
#7
Trending Topics
#8
My car has the original rotors since new, now 100k miles. I had to replace a stud recently and took a descent size mallet to knock the rotors off. There are a couple nicks in the rotor on the side you don't see, but I think it will be fine, I might change just the front.
You guys are right my rotors don't have to be replaced, there is no significant lip/edge on them and overall they are in good shape. At first I somehow thought there would be an extra ring of rust on the rotor after replacing, but I was looking at it all wrong. The wide of the pads are exactly the same so it will have the same contact as the old pads, but on the new ones the vertical contact area is smaller, as the pads wear down they make more contact with the rotor, since it's tapered.
So yeah this time I might just leave the rotors alone, or just do the front. @azipod is right they will probably last a long time, the hybrid drive train does some of the braking from the regen and I'm not an aggressive driver.
@jonathancl you could pop your rotors off, clean up the rust, and repaint them if they are still within spec, save yourself some money.
You guys are right my rotors don't have to be replaced, there is no significant lip/edge on them and overall they are in good shape. At first I somehow thought there would be an extra ring of rust on the rotor after replacing, but I was looking at it all wrong. The wide of the pads are exactly the same so it will have the same contact as the old pads, but on the new ones the vertical contact area is smaller, as the pads wear down they make more contact with the rotor, since it's tapered.
So yeah this time I might just leave the rotors alone, or just do the front. @azipod is right they will probably last a long time, the hybrid drive train does some of the braking from the regen and I'm not an aggressive driver.
@jonathancl you could pop your rotors off, clean up the rust, and repaint them if they are still within spec, save yourself some money.
Last edited by peasodos; 01-27-20 at 12:49 PM.
The following 3 users liked this post by peasodos:
#12
I paid $100 for my economy seat. The guy to the right paid $150. The guy to my left paid $75. Why? That's just how business is done.
Seriously, no idea why Lexus made the rear brakes more expensive. Perhaps the front rotors are shared with another car so it's cheaper to source. Could be anything. They just do what they do.
Seriously, no idea why Lexus made the rear brakes more expensive. Perhaps the front rotors are shared with another car so it's cheaper to source. Could be anything. They just do what they do.
#13
Lexus Test Driver
Maybe the OEM rear rotors are more expensive because they don't sell near as many of them compared to the OEM front rotors. Higher volume usually helps bring the cost down.
#15
Here is a tip for the brake job. The rotors have two screw holes near the center. It takes a M8 x 1.25 bolt, I think same bolt on the front splash guard in front of the front wheels, not 100% sure.
You can easily pop the rotor off the hub by tightening this bolt into the hole(It will push the rotor from the hub the more you tighten), instead of banging on the rotor with a hammer. I marked the bolt holes in red in the pic below.
If your lazy you can buy a pack of 10 on amazon for $5.50 with 1 day shipping for prime members or get it at your local hardware store for less than a $1:
You can easily pop the rotor off the hub by tightening this bolt into the hole(It will push the rotor from the hub the more you tighten), instead of banging on the rotor with a hammer. I marked the bolt holes in red in the pic below.
If your lazy you can buy a pack of 10 on amazon for $5.50 with 1 day shipping for prime members or get it at your local hardware store for less than a $1:
Last edited by peasodos; 01-28-20 at 12:44 AM.