When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Looks great, would the side skirts be in the way to operation of where you'd place the tire jack if you had to chage the tire?
Was the flat finish that came with the skirt "primed" or did you just finish as you did to acomplish the look you wanted?jjj
Enjoy!
Thanks.
Sideskirt wont interfer with jacking point - I lined it up with the width of the underside of the rocker panel. The car was also on jack when I installed, further ensuring it works.
Both parts are polypropylene, I used Krylon fusion paint+primer so there was no "prep"work. Finished with gloss clear.
Yes it should fit, but they don't come pre-drilled, just take your time and you'll find that they line up with the grooves of the car for a nice fitment.
*Swift spring with Megan Racing strut installed. Plenty of feedback on CL about the springs so wont bore you but car was driving good before, now its driving GREAT, especially with the strut bar.
*Floormats.
*License plate cover.
*Retro Toyota stripes as homage for 27 great GS production years.
Stay safe everyone. Right after spring install. Swift say their springs dont need to settle but we'll see if height changes over time. so far, its perfect for my liking. Red and black color theme.
*Swift spring with Megan Racing strut installed. Plenty of feedback on CL about the springs so wont bore you but car was driving good before, now its driving GREAT, especially with the strut bar.
*Floormats.
*License plate cover.
*Retro Toyota stripes as homage for 27 great GS production years.
Stay safe everyone.
Right after spring install. Swift say their springs dont need to settle but we'll see if height changes over time. so far, its perfect for my liking.
Sides: The ones I found with the namesake were either too short, didn't like the style or cost more than I wanted to pay. I actually ordered another one and sent it back before settling on this one. I found these by manually measuring the length of the car and then searching for the specific diameters. https://www.ebay.com/i/223525838804?...iABEgL0ZPD_BwE
Is that the front lip you ordered? Yours is different than the pictures they show, yours indents in the front, the pictures on your link has it rounded all the way around.
Is that the front lip you ordered? Yours is different than the pictures they show, yours indents in the front, the pictures on your link has it rounded all the way around.
Hey, I originally ordered the "Lexon" style but the seller sent me the wrong one. I ended up keeping it because I liked it.
03-31-20, 02:49 PM
