Lexus GS Production To End in August 2020
#17
Technically for model years I believe that's correct but I also believe the 4th gen had been announced in around 2011ish??? I keep holding out hope for something like that but I also realize that todays announcement makes that very unlikely...
The following 2 users liked this post by LexusGSboy:
mikesd1980 (04-30-20),
natnut (04-25-20)
The following 5 users liked this post by bclexus:
drgrant (09-09-20),
Measured (04-23-20),
mrplesh (07-29-20),
signdetres (04-24-20),
tiguy99 (12-10-20)
#22
#23
Cars are not developed at the eleventh hour, as designs are developed years in advance. We would know something by now if it was coming.
These photos of mine from earlier in 2009 of a GS clay model before Spindle Grille was incorporated, tell the story. We already heard news about 4GS in 2008-09 and it paralleled internal movements. Reveal was August 2011, Job 1 in December 2011 and release in February 2012.
The next GS was supposed to go on sale around June 2019 as a 2020 model and design freeze was set for October 2016. That's final look being finalized 32 months before hitting showrooms. Positive news was consistent until December 2016.
Akio Toyoda vetoed it at that point and shifted anything developed onto 2021 Mirai. We are 32 months from end of 2022 and nothing has been heard internally outside of cancellation.
Last edited by Carmaker1; 04-23-20 at 06:12 PM.
The following users liked this post:
Bbgnate (04-30-20)
#27
I'm on board with keeping them for a long time.....my Infiniti turned 20 last September and she's been mine for 17 of those years....
#29
I'm not unhappy, at least my 8 year old GS will age a little slower!
It's not surprising with the 3GS finishing up in 2011 and the 4GS going into production in December 2011 for the 2012 year. If there was anything in the pipeline we'd have heard long by now
It's not surprising with the 3GS finishing up in 2011 and the 4GS going into production in December 2011 for the 2012 year. If there was anything in the pipeline we'd have heard long by now
The following 3 users liked this post by SNiiP3R: