XPEL or 3M Vehicle Wrap
#1
Advanced
Thread Starter
![Question](https://www.clublexus.com/forums/images/icons/icon5.gif)
Anyone got their GS-F wrapped yet Looking at doing the front and have a few questions:
1. What is the a good price if doing the front end (Hood,Bumper,Mirrors, Lights etc...)
2. Are there precut kits ready? If so how difficult is it to install yourself?
I'm in the DFW (Dallas/Forth Worth Area) so any help would be appreciated!
Thanks!
1. What is the a good price if doing the front end (Hood,Bumper,Mirrors, Lights etc...)
2. Are there precut kits ready? If so how difficult is it to install yourself?
I'm in the DFW (Dallas/Forth Worth Area) so any help would be appreciated!
Thanks!
#4
Advanced
Thread Starter
![Exclamation](https://www.clublexus.com/forums/images/icons/icon4.gif)
Has anyone have any experience with the Pre cut kits? If so how difficult/easy is it to do an install yourself?
ClearMask - Kits
Invisible Mask - Kits
XPEL - Kits
ClearMask - Kits
Invisible Mask - Kits
XPEL - Kits
#5
Intermediate
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Has anyone have any experience with the Pre cut kits? If so how difficult/easy is it to do an install yourself?
ClearMask - Kits
Invisible Mask - Kits
XPEL - Kits
ClearMask - Kits
Invisible Mask - Kits
XPEL - Kits
unless you have experience with installing film or tint. If you're going through the trouble of a paint protective film you want it to look perfect,
and correct me if I'm wrong, but the warranty only applies if done by a certified installer?
#6
Advanced
Thread Starter
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I was only planning to some areas myself but leave the difficult ones for an installer (rear bumper) and other areas that have lots of curves or edges.
Trending Topics
#8
Advanced
Thread Starter
#9
Former Sponsor
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
finny76, paint protection film is not an easy craft. While you might have luck installing a pre-cut yourself, I would recommend going with a professional installer. There are a few installers in your area that offer 3M Pro Series. I'm not completely familiar with these shops, but some offer an additional guarantee against paint damage.
Sorry to hear of your experience. 3M paint protection film has always covered yellowing. The newest version of Pro Series does as well (10 years). Might have been an older version of 3M, but you should have been covered for parts and labor either way.
Sorry to hear of your experience. 3M paint protection film has always covered yellowing. The newest version of Pro Series does as well (10 years). Might have been an older version of 3M, but you should have been covered for parts and labor either way.
#10
Advanced
Thread Starter
![Question](https://www.clublexus.com/forums/images/icons/icon5.gif)
finny76, paint protection film is not an easy craft. While you might have luck installing a pre-cut yourself, I would recommend going with a professional installer. There are a few installers in your area that offer 3M Pro Series. I'm not completely familiar with these shops, but some offer an additional guarantee against paint damage.
Sorry to hear of your experience. 3M paint protection film has always covered yellowing. The newest version of Pro Series does as well (10 years). Might have been an older version of 3M, but you should have been covered for parts and labor either way.
Sorry to hear of your experience. 3M paint protection film has always covered yellowing. The newest version of Pro Series does as well (10 years). Might have been an older version of 3M, but you should have been covered for parts and labor either way.
That being said the average quote for "XPEL Ultimate" for complete Front End (Bumper, Headlights, Full Hood, Fenders, Mirrors & door trims/handles) is $1300. Several shops have quoted me that figure.
Now the question is, how much would a 3M or Suntek install be?
Last edited by finny76; 10-30-17 at 06:44 PM.
#12
Former Sponsor
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
We're hoping to host (or at least attend), a local CL event soon so we can show off our latest and greatest PPF.
#13
Pole Position
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I just had the full front end done with Xpel. Came out nice. This car is a rock chip magnet, I already have coupe of chips on my fender and CF lip. It wasn't cheap but you cant even tell if its on, They had the car for 3 days.
#14
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I'm also doing this over the summer. Expensive, but worth it. I have it on my Supra and it doesn't have a single chip on it. It's not impervious to chips, but as long as you are careful and don't tail gate, it helps a lot.
STeve
STeve
#15
Driver School Candidate
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I have install 3M Pro Series full front end installation done by myself 80% of it and 20% of it with the help of my friend. It was our first time ever to install a full clear bra. Overall I would rate it about 5 out of 10 for difficulty doing it yourself. Cost me about $700 to do my whole front end.
I would say you could do side mirror, headlights, full hood, and fenders yourself without any help. But for the Bumper section you need help. With all the curves you need a ton of patience. Make sure you buy all the right tools. It will make your job a lot easier.
Also I only mess up on the bumper twice. So, I had to buy an extra set for the front bumper. Let me know if you have any questions.
I would say you could do side mirror, headlights, full hood, and fenders yourself without any help. But for the Bumper section you need help. With all the curves you need a ton of patience. Make sure you buy all the right tools. It will make your job a lot easier.
Also I only mess up on the bumper twice. So, I had to buy an extra set for the front bumper. Let me know if you have any questions.