finally finished my headlight mod
#1
Lead Lap
Thread Starter
Join Date: Jul 2008
Location: Canada
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
bought a set of headlights that I wanted to clear corner. I picked them up, and saw that there was no orange in them, or so i thought. turns out after some polishing, they were just hazed over and yellowed. even on the inside of the lens they were hazy and yellow.
So i decided to pull them apart and clear corner them, and decided to do some tinkering with them, and try to come up with something unique. let me know what you think!
btw: these lights are my daytime running lights. meaning they are on constantly, and DRL's (daytime running lights) are legally required by law in Canada.
![](http://i5.photobucket.com/albums/y165/deknick/IMG_2032.jpg)
![](http://i5.photobucket.com/albums/y165/deknick/IMG_2011.jpg)
So i decided to pull them apart and clear corner them, and decided to do some tinkering with them, and try to come up with something unique. let me know what you think!
btw: these lights are my daytime running lights. meaning they are on constantly, and DRL's (daytime running lights) are legally required by law in Canada.
![](http://i5.photobucket.com/albums/y165/deknick/IMG_2032.jpg)
![](http://i5.photobucket.com/albums/y165/deknick/IMG_2011.jpg)
![](http://i5.photobucket.com/albums/y165/deknick/IMG_2010.jpg)
Last edited by deknick; 08-02-09 at 02:05 AM.
#4
Lead Lap
Thread Starter
Join Date: Jul 2008
Location: Canada
Posts: 797
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
it took me a while, the usual hour or so to rip them apart. then just a matter of ripping out the orange signal thing, grinding some stuff bending some stuff, cutting some stuff, wiring some stuff, glueing some stuff, soldering, some siliconing, then i had to heat gun them back together and make sure they were sealed. all in all, probally about 20 hours before install, and then install was a ***** cause i was to lazy to take the bumper off, and i had to do it on the street, so my back was killing me from leaning over so much. hahaha