What did you do to your GX TODAY?
07-21-19 | 07:14 AM
#1066
Pole Position
Joined: Feb 2013
Posts: 2,318
Likes: 526
From: WPG, MB
07-22-19 | 05:47 PM
#1067
Driver School Candidate
Joined: Jun 2019
Posts: 26
Likes: 13
From: PA
Headlight restoration, gave her a heck of a bath before it goes to the paint shop, installed a 10.1" Tesla display (exact model I bought is this one, it was plug and play for my truck).
Next is a dash cover from Coverlay Manufacturing (arrived today), new front speakers (arrive Saturday), reverse camera and Apple Car Play kit (come in next week or so from AliExpress), fix the trim I broke (see picture), full steam and Tornador cleaning of the interior, getting bumpers and hood resprayed to color match (lots of clear peeling and scratches), timing belt/water pump/thermostat replacement (next week), new LED H11 lowbeams, respray front grille black, then restore wheels after everything else is done. I think that's it.
The following users liked this post:
Lextazy (09-10-19)
The following users liked this post:
Rygar470 (08-19-19)
07-23-19 | 03:24 PM
#1069
Driver School Candidate
Joined: Jun 2019
Posts: 23
Likes: 14
From: KY
Changed the air mix blend servo
I changed the air mix servo out today with one from autozone. I ended up having to purchase a screwdriver bit ratchet to get to one of the screws that holds the servo to the bracket. It was still a little difficult.
The replacement servo came with instructions which helped. The white plastic piece that the servo attaches to came out with the original. It went back together ok. You have to rotate the plastic piece to match the orientation of the servo. I was scared at first but it worked ok.
The replacement servo came with instructions which helped. The white plastic piece that the servo attaches to came out with the original. It went back together ok. You have to rotate the plastic piece to match the orientation of the servo. I was scared at first but it worked ok.
07-24-19 | 06:46 AM
#1070
Pole Position
Joined: Feb 2013
Posts: 2,318
Likes: 526
From: WPG, MB
I changed the air mix servo out today with one from autozone. I ended up having to purchase a screwdriver bit ratchet to get to one of the screws that holds the servo to the bracket. It was still a little difficult.
The replacement servo came with instructions which helped. The white plastic piece that the servo attaches to came out with the original. It went back together ok. You have to rotate the plastic piece to match the orientation of the servo. I was scared at first but it worked ok.
The replacement servo came with instructions which helped. The white plastic piece that the servo attaches to came out with the original. It went back together ok. You have to rotate the plastic piece to match the orientation of the servo. I was scared at first but it worked ok.
The following 4 users liked this post by Vols4life:
08-19-19 | 07:44 PM
#1072
Driver School Candidate
Joined: Jun 2019
Posts: 26
Likes: 13
From: PA
Headlight restoration, gave her a heck of a bath before it goes to the paint shop, installed a 10.1" Tesla display (exact model I bought is this one, it was plug and play for my truck).
Next is a dash cover from Coverlay Manufacturing (arrived today), new front speakers (arrive Saturday), reverse camera and Apple Car Play kit (come in next week or so from AliExpress), fix the trim I broke (see picture), full steam and Tornador cleaning of the interior, getting bumpers and hood resprayed to color match (lots of clear peeling and scratches), timing belt/water pump/thermostat replacement (next week), new LED H11 lowbeams, respray front grille black, then restore wheels after everything else is done. I think that's it.
08-24-19 | 04:09 PM
#1074
Rookie
Joined: Nov 2016
Posts: 26
Likes: 1
From: New York
Replaced original headlights, with a set of LEDs. https://www.amazon.com/gp/product/B07GKPR452/ ( Recommended by @agent15 )
Easy to install, and the output is worlds apart.
Easy to install, and the output is worlds apart.
08-24-19 | 06:18 PM
#1076
Lead Lap
Joined: Apr 2017
Posts: 404
Likes: 136
From: Nevada
That's weird. When we ordered them @agent15 and I, there was an option for H11(Which also said they were the same type as H8 & H9, Weird I know).
Let me research it a little..
Edit:
And to ***** my pictures a little more, here's the finished product:
https://www.clublexus.com/forums/gx-...l#post10594970
Let me research it a little..
Edit:
And to ***** my pictures a little more, here's the finished product:
https://www.clublexus.com/forums/gx-...l#post10594970
The following users liked this post:
cardboy008 (08-26-19)
08-24-19 | 06:44 PM
#1077
Rookie
Joined: Apr 2014
Posts: 68
Likes: 7
From: New Jersey
Nice truck! How did you get the Lexus logo on the wheel center cap? I have the same wheels and I just put the stickers on, but they get ugly fast so I had to take them off and replace them with some with TRD center caps. But I'd like to go back to the Lexus logo like yours because the TRD center are not as secure. Thanks.
The following users liked this post:
Rygar470 (08-24-19)
08-25-19 | 08:55 AM
#1078
Pole Position
Joined: Feb 2013
Posts: 2,318
Likes: 526
From: WPG, MB
I'm loving my wellvisors as well, I'd put theses things on the 4Runner as well if the wife would let me.
The following users liked this post:
Rygar470 (08-30-19)
08-30-19 | 07:59 PM
#1080
Lead Lap
Joined: Apr 2017
Posts: 404
Likes: 136
From: Nevada
I know everyone frowns upon these bull bars(Multipliers they like to refer to them as) but I like the way that looks... Where and what brand is it? Please...
PS: Oh, and did I mention how cool that rack looks??? Kinda looks like a Baja Rack...
PS: Oh, and did I mention how cool that rack looks??? Kinda looks like a Baja Rack...