Official 2nd Gen GX Modification (DIY) Thread!!
#151
#152
Mirror Mounted Radar Detector??
Has any purchased one of the: BlendMount 2000 Series Mount for Valentine One radar detector, BV1-2000A that is advertised on this site. $89.95
I'm just a little concernerd about the additional weight on the mirror mount. I'm sure the cost of replacing the mirror if anything happend would be outragous.
Thanks
I'm just a little concernerd about the additional weight on the mirror mount. I'm sure the cost of replacing the mirror if anything happend would be outragous.
Thanks
#153
Has any purchased one of the: BlendMount 2000 Series Mount for Valentine One radar detector, BV1-2000A that is advertised on this site. $89.95
I'm just a little concernerd about the additional weight on the mirror mount. I'm sure the cost of replacing the mirror if anything happend would be outragous.
Thanks
I'm just a little concernerd about the additional weight on the mirror mount. I'm sure the cost of replacing the mirror if anything happend would be outragous.
Thanks
#156
For board buy this
http://www.v-leds.com/Exterior-LED/C...85865-1-2.html
You will need two sets
For doors and inside vanity
http://www.v-leds.com/Interior-LED/G...04828-1-2.html
You will need 6 sets. Those are a little longer and will not fit in board ligting.
For parking lights, I use those
http://www.v-leds.com/Interior-LED/D...64848-1-2.html
For turn signals. You will need to buy load resistors as well to convert to LED turn signals
http://www.v-leds.com/Exterior-LED/P...34404-1-2.html
Backup lights
http://www.v-leds.com/Exterior-LED/P...26829-1-2.html
Use coupon code VISION for additional 15% off on top of current sale. The code should be good until end of the month.
Last edited by Luke27617; 11-18-10 at 08:25 PM.
#158
I am afraid about breaking the cover on the dome and door lights. What's the best way to remove the covers without breaking and/or scratching the surroundings? Can you post pictures of how to remove the dome lights? I would really appreciate it!
#159
Use a small flat screwdriver to pop it out inside lights. Look at post 5, 10 & 29 for pictures.
#160
I got the interior bulbs today and installed them, however the the door bulbs were bigger than the original so I couldn't put back a clear cover that was there before. Should I order a smaller bulb for the doors or just leave it without the plastic cover? It is the same bulb however the LED is longer and it won't let me install that other clear plastic housing.
#161
I got the interior bulbs today and installed them, however the the door bulbs were bigger than the original so I couldn't put back a clear cover that was there before. Should I order a smaller bulb for the doors or just leave it without the plastic cover? It is the same bulb however the LED is longer and it won't let me install that other clear plastic housing.
#162
It's ok, I'll order the smaller ones and keep the others as extras in case I need more. Which bulb goes in the doors, the same one that I used for the running boards? Before I forget, thank you for the mod, the lights look really nice and I love the white color, it's much brighter! Now, I'll do my wife's ES350 and my daughter's Maxima.