When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Swapped out the factory 4" tip that came with my Gibson catback with a 5" tip. Did some modding, some intentional some unintentional to make it fit but I think it looks better.
Swapped out the factory 4" tip that came with my Gibson catback with a 5" tip. Did some modding, some intentional some unintentional to make it fit but I think it looks better.
Did you swapped tail lights with Toyota Prado lights?
Swapped out the factory 4" tip that came with my Gibson catback with a 5" tip. Did some modding, some intentional some unintentional to make it fit but I think it looks better.
Should have gone straight to the 7” pipe... that would be awesome! Or dual 6”ers...
Did you swapped tail lights with Toyota Prado lights?
I do have prado lights. the sort of fit, gap at the bottom and I had so do some wiring, nothing major for me, i like it better than the factory clear lights.
Originally Posted by User21c
Should have gone straight to the 7” pipe... that would be awesome! Or dual 6”ers...
i thought about it. I first wanted to see if the Gibson catback out of the box would just bolt up. then once it was on, I decided to measure the opening in the bumper and I knew it was close. the tip enlarged the opening to make itself fit. I think a 4.5" tip would fit without modifying the bumper.
Those front definitely are super simple. The easiest ones I have ever done. I just put OEM replacements when I did mine last year and didn't replace rotors either.
Acrad35751, bbqsoup, anyone else?
What’s the position of the brake wear indicators for the front and rear brakes pads - outer or inner & top or bottom?
I think most modern things I have worked on these have been inner since that pad would be visually harder to observe without taking the tire off.
I don't see a designation for the fronts in the FSM...just the rears. It was long enough ago for me I can't remember this specific visual about the job. Sorry
The wear bar is on the inner pads. One thing to note, save the oem shims, the ProAct pads shims are just small plates stick behind the pads so I reused the oem ones.
Swapped the 14+ altezzas for a set of 10-13 tails. I am neither fast nor furious so maybe not an impressive mod but it’s my favorite so far.
much like you i am not a fan of the clear the lights. i tried to wrap them today in red vinyl with no success. i got 80% there but i cant seem to finish up the curve on the bottom. ill take it in and have a professional do it