"What did you do to your..." thread?
#1306
Cool Dog Tail Gate Lock.
When the weather gets warmer again this will help my dog in the back. Not as good as the 4R window... but good enough
Amazon has these and I learned of it via an FJ owner. Pretty great idea. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
When the weather gets warmer again this will help my dog in the back. Not as good as the 4R window... but good enough
Amazon has these and I learned of it via an FJ owner. Pretty great idea. https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
rad rubber makes one of those too, https://radrubberdesign.com/product/...ss-stabilizer/
(be careful driving around with the rear glass open unless the exhaust is re-routed out the right side... the gases will get sucked in the cabin with OEM configuration (straight out the back) so if this is installed while driving around make sure you have some other window or sunroof open to ventilate the cabin from the exhaust fumes to avoid the cabin being the low pressure area)
The following users liked this post:
bowhun2r (12-14-21)
#1307
Put some proper tires on the truck
FN Pro Wheels 17x8 +0. 24.8lbs
Cooper AT34S 265/70/17
Had to remove the obligatory inside screw head and replace that with a more flush plastic push pin for the running board/inside fender plastic. Spare tire fits fine (I do not have the factory hitch...but from my research it should still fit).
I've had these tires on multiple vehicles and I really like them. Great traction in rain/snow and road noise is minimal.
new wheels push the tires out and now flush with the fender.
Spare fits. Tight... but fits.
Inside screw on both sides replaced with plastic push pin. Fixed the reverse at full lock tire rubbing.
FN Pro Wheels 17x8 +0. 24.8lbs
Cooper AT34S 265/70/17
Had to remove the obligatory inside screw head and replace that with a more flush plastic push pin for the running board/inside fender plastic. Spare tire fits fine (I do not have the factory hitch...but from my research it should still fit).
I've had these tires on multiple vehicles and I really like them. Great traction in rain/snow and road noise is minimal.
new wheels push the tires out and now flush with the fender.
Spare fits. Tight... but fits.
Inside screw on both sides replaced with plastic push pin. Fixed the reverse at full lock tire rubbing.
#1313
Now that is bad ***! Pics came through.
If you have any other pics showing how you made your cuts and the process for install that would be extremely beneficial.
This is on my list and your pic basically cemented the mod.
And just checked out your link in your sig... Nice. No reason to double post.
And an ND owner .
Last edited by bowhun2r; 12-16-21 at 04:25 PM. Reason: Followed link to build on IH8MUD
#1314
SAIS Mod
I have a 2014 460 and recently saw a post on a modification for the secondary air injection system. I had mine go out in my '08 Sequoia and that repair was north of $3K so did this one right away. Bought the filter that was recommended and was an easy mod and should save some money and headaches in the future.
#1315
I have a 2014 460 and recently saw a post on a modification for the secondary air injection system. I had mine go out in my '08 Sequoia and that repair was north of $3K so did this one right away. Bought the filter that was recommended and was an easy mod and should save some money and headaches in the future.
https://www.clublexus.com/forums/gx-...n-version.html
The following 9 users liked this post by bowhun2r:
AlexDev (12-05-22),
alpha0M3G4 (12-21-21),
E46CT (12-30-21),
GX95030 (12-17-21),
Islero (12-19-21),
and 4 others liked this post.
#1318
Now that is bad ***! Pics came through.
If you have any other pics showing how you made your cuts and the process for install that would be extremely beneficial.
This is on my list and your pic basically cemented the mod.
And just checked out your link in your sig... Nice. No reason to double post.
And an ND owner .
If you have any other pics showing how you made your cuts and the process for install that would be extremely beneficial.
This is on my list and your pic basically cemented the mod.
And just checked out your link in your sig... Nice. No reason to double post.
And an ND owner .
I love my Miata, but we're taking a break right now. She's a pain in the ***, but she's my pain in the ***. I've been thoroughly enjoying comfort and quietness since I picked up the GX. It isn't stock, either. I can't stand stock vehicles. There's always something I want to change.
#1319
Trim piece came loose on the highway a few weeks ago. Pulled over and pulled it off and a few tabs are broken. I assume this was from when it was replaced before my ownership. Waiting for Bell Lexus to give me the part numbers and a price quote for a new trim piece and the five clips that hold it in place.
#1320
Looks like they didn't replace with windshield replacement
Part #'s --->
[Windshield Molding Clips]
PN: 75545-53011
[Windshield Reveal Molding]
PN: 75535-60020 / Passenger Side
PN: 75536 -60010 / Driver Side
[Parts List]
https://www.clublexus.com/forums/gx-...t-numbers.html
Windshield thread
https://www.clublexus.com/forums/gx-...ml#post9907661
Part #'s --->
[Windshield Molding Clips]
PN: 75545-53011
[Windshield Reveal Molding]
PN: 75535-60020 / Passenger Side
PN: 75536 -60010 / Driver Side
[Parts List]
https://www.clublexus.com/forums/gx-...t-numbers.html
Windshield thread
https://www.clublexus.com/forums/gx-...ml#post9907661
The following users liked this post:
Romanova (12-21-21)