Skid plates / Sliders
#106
Super Moderator
I assume most of those are getting tossed in garbage too. Not a cheap part at around $145/new
https://www.oemvehicleparts.com/oem-...pad-5177260170
https://www.oemvehicleparts.com/oem-...pad-5177260170
#107
Racer
Thanks for the link, it is expensive...yeah most guys just trash it after cutting...
I assume most of those are getting tossed in garbage too. Not a cheap part at around $145/new
https://www.oemvehicleparts.com/oem-...pad-5177260170
https://www.oemvehicleparts.com/oem-...pad-5177260170
The following users liked this post:
Acrad (11-02-18)
#108
I assume most of those are getting tossed in garbage too. Not a cheap part at around $145/new
https://www.oemvehicleparts.com/oem-...pad-5177260170
https://www.oemvehicleparts.com/oem-...pad-5177260170
#109
Racer
LOL...not many people damage that piece but you never know. Do you have to remove the runningboard in order to take it off? Is it snapped on?
#110
Super Moderator
This appears to be what the underside fasteners look like.
The following users liked this post:
bbqsoup (11-03-18)
#112
Super Moderator
A lot have gone RCI. I'm still waiting on BudBuilt but not concerned right now with it being winter. If things get closer to one year mark I'll probably have to make some tougher decisions.
#113
Same as 5th Gen?
#114
Super Moderator
Yeah they are designing a 460 specific set of plates with exact service points for diff, oil, oil filter, etc. My order slipped through last year when their website was posting availability but it was from the crawl of a beta site that was online. If you look at oil filter access panel on the other makes it doesn't line up with the 4.6L's oil filter. We'll see if they come through with design... I know most would not have waited as long as I have but I will be receiving the first set when they go out. That is what Bud told me.
The following users liked this post:
Greenbow (01-17-19)
#115
Yeah they are designing a 460 specific set of plates with exact service points for diff, oil, oil filter, etc. My order slipped through last year when their website was posting availability but it was from the crawl of a beta site that was online. If you look at oil filter access panel on the other makes it doesn't line up with the 4.6L's oil filter. We'll see if they come through with design... I know most would not have waited as long as I have but I will be receiving the first set when they go out. That is what Bud told me.
#116
My RCI skids are holding up great so far with plenty of use, a few hard hits and not even a dent. Not sure if anyone has used ARB on a 150 yet, some guys have them on 120s. If you need skids just go with RCI, if you can't modify them yourself just skip the transfer case skid until one comes out that is bolt on.
The following 2 users liked this post by Nickk6:
HitchCrack (01-21-19),
Huskers (01-21-19)
#117
#118
Super Moderator
Philly01 : It is actually the one for a 4R. It says 1016 on my invoice since they hadn't updated website at time when I purchased April 2018. No reason it won't fit all 10-19 460s.
http://budbuilt.com/2010-2018-5th-Ge...ate_p_544.html
http://budbuilt.com/2010-2018-5th-Ge...ate_p_544.html
The following users liked this post:
Philly01 (02-13-19)
#119
Philly01 : It is actually the one for a 4R. It says 1016 on my invoice since they hadn't updated website at time when I purchased April 2018. No reason it won't fit all 10-19 460s.
http://budbuilt.com/2010-2018-5th-Ge...ate_p_544.html
http://budbuilt.com/2010-2018-5th-Ge...ate_p_544.html
The following users liked this post:
Philly01 (02-13-19)
#120
Super Moderator
No drilling and existing holes. I did it by myself so I just used a floor jack to help raise it up into place and tightened down bolts. It was easy swap taking old one off and putting this one on.
My install pics
https://www.clublexus.com/forums/gx-...l#post10195434
My install pics
https://www.clublexus.com/forums/gx-...l#post10195434