GX - 2nd Gen (2010-2023) Discussion topics related to the 2010 + GX460 models

Door Edge Guard

Thread Tools
 
Search this Thread
 
Old 05-19-17 | 12:17 AM
  #1  
mattau's Avatar
mattau
Thread Starter
Pit Crew
 
Joined: May 2017
Posts: 110
Likes: 16
From: ON
Default Door Edge Guard

Does anyone have this installed on their GX? I am a new owner of a 2013 GX and am debating whether it's a good idea. Anyone care to comment and better yet, post some pics of what it looks like? Thank you in advance
Old 05-19-17 | 12:47 PM
  #2  
cc4sc's Avatar
cc4sc
Driver School Candidate
 
Joined: Dec 2015
Posts: 21
Likes: 6
From: California
Default

I'm pretty sure my has it as it was offered when I purchased it. I actually didn't want it when I bought it so I asked the dealer to take them off. They ended up not charging me but they told me the guard was not taken off.

All it is (on mine at least) is a thin (less than 1 inch wide) clear coating that wraps around the doors' edges. It basically looks like scotch tape. Personally, I don't see the value in these even now that they're on my car and actually would prefer they were never put on as it leave a small outline of the "tape". I'd definitely pass on them.
Old 05-19-17 | 01:29 PM
  #3  
mattau's Avatar
mattau
Thread Starter
Pit Crew
 
Joined: May 2017
Posts: 110
Likes: 16
From: ON
Default

Originally Posted by cc4sc
I'm pretty sure my has it as it was offered when I purchased it. I actually didn't want it when I bought it so I asked the dealer to take them off. They ended up not charging me but they told me the guard was not taken off.

All it is (on mine at least) is a thin (less than 1 inch wide) clear coating that wraps around the doors' edges. It basically looks like scotch tape. Personally, I don't see the value in these even now that they're on my car and actually would prefer they were never put on as it leave a small outline of the "tape". I'd definitely pass on them.
Thanks for your response. I am confused about it as according to here: https://www.lexuspartsnow.com/parts/...-60110-10.html, they are color coded to the paint color so it doesn't seem like the clear bra you put on the hood.
Old 05-19-17 | 01:43 PM
  #4  
tecman's Avatar
tecman
Lead Lap
 
Joined: Aug 2013
Posts: 4,350
Likes: 895
From: GA
Default

That is stainless steel not a film like cc4sc has.

Last edited by tecman; 05-19-17 at 01:47 PM.
Old 05-19-17 | 01:47 PM
  #5  
mattau's Avatar
mattau
Thread Starter
Pit Crew
 
Joined: May 2017
Posts: 110
Likes: 16
From: ON
Default

I have the side molding, does it work with the side molding?
Old 05-19-17 | 01:59 PM
  #6  
tecman's Avatar
tecman
Lead Lap
 
Joined: Aug 2013
Posts: 4,350
Likes: 895
From: GA
Default

It fits all 460s and the side molding was standard on '12+ so yes I am sure it stops at or just above the molding.
https://www.lexuspartsnow.com/instal...ard%20IssA.pdf
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
UZ214
GX - 2nd Gen (2010-2023)
4
02-08-19 07:31 AM
ckgs
GX - 2nd Gen (2010-2023)
2
03-30-14 06:11 PM
donmatt
GX - 2nd Gen (2010-2023)
29
03-07-14 02:20 PM
TAP4636
GX - 1st Gen (2003-2009)
25
02-27-08 01:11 PM
superted
GX - 1st Gen (2003-2009)
3
12-22-03 07:47 AM



Quick Reply: Door Edge Guard



All times are GMT -7. The time now is 07:25 PM.