View Poll Results: Crawl / MTS - model year/trim upgrade survey
2010 - Base - Added Crawl
0
0%
2011 - Base - Added Crawl
0
0%
2011 - Premium (stock Crawl) - Added MTS
0
0%
2012 - Base - Added Crawl
0
0%
2012 - Premium (stock Crawl) - Added MTS
0
0%
2014 Base - Added Crawl
0
0%
2015 Base - Added Crawl
0
0%
2015 Premium - Added Crawl
0
0%
2016 Base - Added Crawl
0
0%
2016 Premium - Added Crawl
0
0%
2017 Base - Added Crawl
0
0%
2017 Premium - Added Crawl
0
0%
2017 Luxury - Added Crawl/MTS
0
0%
2018 Base - Added Crawl
0
0%
2018 Luxury - Added Crawl
0
0%
2019 Base - Added Crawl
0
0%
2019 Premium - Added Crawl
0
0%
2019 Luxury - Added Crawl
0
0%
2019 Luxury - Added Crawl/MTS
0
0%
Voters: 123. You may not vote on this poll
MOD: Crawl Control (CC) and Multi Terrain Select (MTS)
#346
Super Moderator
Thread Starter
#347
Super Moderator
Thread Starter
I am told the 040 is on backorder in US as well but some are being shipped to Canada.
The other day a Canadian dealer told me $327.41 ($254 USD) + HST for 040.. but would take 10-15 business days minimum and they wouldn't order without the VIN.
The other day a Canadian dealer told me $327.41 ($254 USD) + HST for 040.. but would take 10-15 business days minimum and they wouldn't order without the VIN.
#348
Racer
oemvehicleparts.com confirmed for me that 040 is what is being used in '14+ Canadian trims with Technology or Executive packages.
They seem to be very knowledgeable and responsive.
They seem to be very knowledgeable and responsive.
#349
Super Moderator
Thread Starter
070: Longo Lexus said they see a back order for 4 to the southern CA parts hub.
#350
Super Moderator
Thread Starter
Last edited by Acrad; 03-06-18 at 07:18 PM.
The following users liked this post:
LexOverlnd (03-06-18)
#351
Nice find.
#352
Racer
I contacted them via facebook asking if it’s in stock.
Hi Sonny
Thank you for your message,
84970-60070 Switch Assy = NA
You can always contact us on whatsapp for faster response.
WhatsApp number is +971527300666
We deliver all parts to your doorstep.
Regards
Hekmat
Hi Sonny
Thank you for your message,
84970-60070 Switch Assy = NA
You can always contact us on whatsapp for faster response.
WhatsApp number is +971527300666
We deliver all parts to your doorstep.
Regards
Hekmat
#353
@Acrad35751 Did you lose your view of front wheel angle on the dash after you got the CC?
Mine became this after I got the CC. There were two front wheels that turn with the steering input.
It's a small thing though. I'm just being curious.
By the way, got the CC up and running.
Thank you for being so helpful all the time.
Mine became this after I got the CC. There were two front wheels that turn with the steering input.
It's a small thing though. I'm just being curious.
By the way, got the CC up and running.
Thank you for being so helpful all the time.
The following users liked this post:
Acrad (03-07-18)
#354
Racer
Oh wow. What year is your cocio?
How did you zero out? By Techstream or via ODB wire up?
How did you zero out? By Techstream or via ODB wire up?
#355
I used Techstream. It's a fairly simple process. Just follow the guide Acrad posted at #46.
This is what I did:
1. Enter the following menus: Chassis / ABS/VSC/TRAC / Utility
2. Reset memory
3. Test mode
(Both 2 & 3 are under the Utility menu)
DONE
Last edited by cicio; 03-07-18 at 01:08 PM.
#356
I don't know if a test mode is necessary. seems like a reset will do.
I forgot the reset memory part and did test mode first. And I did test mode again after resetting the memory just to make sure.
I forgot the reset memory part and did test mode first. And I did test mode again after resetting the memory just to make sure.
#357
Super Moderator
Thread Starter
That is great news :-)
to get steering indicator back it is at bottom of calibration document
It should just reappear while driving straight 200-300 feet
"Drive the vehicle straight ahead at 40 km/h (25 mph) or more for at
least 10 seconds.
Confirm the steering angle display function.
Turn the steering wheel to the left and right and confirm that the
steering angle display function is normal."
to get steering indicator back it is at bottom of calibration document
It should just reappear while driving straight 200-300 feet
"Drive the vehicle straight ahead at 40 km/h (25 mph) or more for at
least 10 seconds.
Confirm the steering angle display function.
Turn the steering wheel to the left and right and confirm that the
steering angle display function is normal."
The following 2 users liked this post by Acrad:
cicio (03-07-18),
LexOverlnd (03-07-18)
#359
Super Moderator
Thread Starter
That vendor from Dubai stated
“I can arrange by Air from Japan within 20-30 days.
How many pcs do you want?”
=========
Another US dealer told me it could be up to 4 months to fill a backorder
“I can arrange by Air from Japan within 20-30 days.
How many pcs do you want?”
=========
Another US dealer told me it could be up to 4 months to fill a backorder
#360
Super Moderator
Thread Starter
I was thinking about the MTS module (Driver Support) last night
This would give you a level of ATRAC that could be used in 4H on the "Mud & Sand" (Snow) mode.
Stock ATRAC is 4L only
This would give you a level of ATRAC that could be used in 4H on the "Mud & Sand" (Snow) mode.
Stock ATRAC is 4L only
Last edited by Acrad; 03-07-18 at 03:50 PM.