When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Thanks I appreciate the compliment! Just joined and I am not a paid advertiser on here so I hope I dont offend anyone or come off the wrong way but I did want to just say that I appreciate your business and to make a correction on the website.
Its oemvehicleparts.com not oempartsdirect idk who that is but its not me.
Woops! Sorry Matt, threw the wrong business name out there!
Oh, that has the Europen Extra ear on it that won't let if fit on the American version console! You better send it to me since you can't use it. ( )
Lol. Have dremel, will cut. I will go rewatch some video from tecman and pics from Acrad on how to take the middle console apart.
When is yours coming in?
I've got the 70 module in, but no CC light on the dash. I'm assuming I need to do the ZPC if I remember correctly. Has anyone done it using the paper clip method? I get stuck on the part where you have to unplug and plug it 4 or more times within 8 seconds...Doesn't seem to do anything differently.
I saw that later on in the document but I was following the initial steps where it says there should be a next button. Also reading through it doesn’t mention anything regarding the front camera. I already have the steering angle on the side camera. I will try it again.
That's really a mystery for what really triggers this to be on and off. Just didn't make sense to have whole bunch of hardware only for a dynamic guideline consider all the signals are already there such as steering wheel angle positions, etc. Thanks for the update.
Woohoo, I can confirm a 2010 Base model can accept both modifications! I used Techstream to perform the SKID clear and test and now Craw Control works! MTS and Crawl both work.