When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I was looking parts up for another member the other day.
If you lose any of the white or pink clips on those console side trim pieces here are the part numbers:
White clips - PN: 9046710201
Pink Clips - PN: 9046712080
Originally Posted by Acrad
While putting in my VAIS bypass a few weeks back I lost one of the clips at starred spots on the following trim piece. This trim is also removed to install the crawl switch.
EDIT: Correction- install of MTS...not required for crawl switch
To keep this from happening again or occurring just put a small piece of black electrical tape on them before putting them back into place. This will prevent them from potentially dropping into the console. Trim piece will still fasten nicely and nothing can be seen.
PN: 90468-04157 - Finish Plate Retainer $1.18 each
Quick question (sorry if i missed it in this thread, its gotten pretty long). I installed the CC 070 module on my premium 2012 (already did the MTS). After installing, nothing is showing up...do you have to do the ZPC before anything shows up in center dash? Right now I can't find anything different than prior to the install. BTW, the front screw nearest to the driver was a bear to deal with.
thanks in advance.
I need to get the secondary intake done on recall (along with transmission oil change) and I was going to have the dealer do it when it was in. If not, I will try paper clip...if that fails try to hook up with someone in Denver for techstream.
need to add CC during cal. this isnt in the official docs because its already done at the factory when you do have CC>
right before exit push the CC on/onn button. you get a quick flash of the icon light. this is when using TS
then you exit.
Originally Posted by Huskers
Quick question (sorry if i missed it in this thread, its gotten pretty long). I installed the CC 070 module on my premium 2012 (already did the MTS). After installing, nothing is showing up...do you have to do the ZPC before anything shows up in center dash? Right now I can't find anything different than prior to the install. BTW, the front screw nearest to the driver was a bear to deal with.
thanks in advance.
g60man: When we search out that module (85940-60120) we find a 2018 Prado that is being parted out. It makes me think not related to MTS. Wondering if they moved the MTS logic to the 4WD computer further to the right under front passenger dash?
Looking at pics one can see this Prado is equipped with MTS and Crawl from those center controls. IIRC... some '18 Prado tech is basically what is now being used on '20... like new terrain monitor...etc.
g60man: When we search out that module (85940-60120) we find a 2018 Prado that is being parted out. It makes me think not related to MTS. Wondering if they moved the MTS logic to the 4WD computer further to the right under front passenger dash?
Looking at pics one can see this Prado is equipped with MTS and Crawl from those center controls. IIRC... some '18 Prado tech is basically what is now being used on '20... like new terrain monitor...etc.