GX - 2nd Gen (2010-2023) Discussion topics related to the 2010 + GX460 models

WTB: GX460 Crossbars

Thread Tools
 
Search this Thread
 
Old 07-13-17 | 09:36 AM
  #16  
bbqsoup's Avatar
bbqsoup
Racer
 
Joined: Jan 2013
Posts: 1,734
Likes: 600
From: San Jose, CA
Default

Not any noticeable wind noise with normal driving even at freeway speed but you will hear a bit of it if there's crosswind like NewB2Lexus mentioned. It's definitely quieter than my old Yakima round bars.
@NewB2Lexus, what kind of ski rack do you have? I have a Yakima Big Hound with their round bar mount and want to put it on the GX but not sure which mount will fit the bars. Any picture of your ski rack?
The following users liked this post:
StrannikMD (07-13-17)
Old 07-13-17 | 11:00 AM
  #17  
NewB2Lexus's Avatar
NewB2Lexus
Intermediate
 
Joined: Feb 2015
Posts: 373
Likes: 127
From: Northwest
Default

I just have a basic universal Thule I bought many years ago that can hold up to 5 skis. There are ones that can slide out for easier access but I'm a bit old school and just like to put into place myself :-).

Picture is here:

https://www.clublexus.com/forums/gx-...e-2012-gx.html
The following users liked this post:
Extremo78 (07-13-17)
Old 07-13-17 | 08:13 PM
  #18  
Extremo78's Avatar
Extremo78
Thread Starter
Driver School Candidate
 
Joined: Mar 2011
Posts: 10
Likes: 0
From: Ontario
Default

Originally Posted by mbykow
Is there a weight limit for the bars? My old 4Runner said it was 100 lbs.
Its 176 lbs in total

Old 07-13-17 | 08:20 PM
  #19  
Extremo78's Avatar
Extremo78
Thread Starter
Driver School Candidate
 
Joined: Mar 2011
Posts: 10
Likes: 0
From: Ontario
Thumbs up

Originally Posted by NewB2Lexus
It comes with a small hex wrench with a red plastic indicator so you'll tighten it to the proper torque. The instruction page shows the tool. As you tighten it will flex and you stop tightening once it reaches the mark on the plastic indicator.
Thank you!

I didn't pay heed to the tool when I first saw it but the way you explained it, made sense. I went back today and tried it again. Found out that none of the screws were as tight as they should have been!

Appreciate the help!
Old 07-13-17 | 08:23 PM
  #20  
Extremo78's Avatar
Extremo78
Thread Starter
Driver School Candidate
 
Joined: Mar 2011
Posts: 10
Likes: 0
From: Ontario
Thumbs up

Originally Posted by rroman001
Ebay special for 205...

The bars cost me about the same in Canada.

Must say,the bars do add to the look of the truck!
Old 07-13-17 | 08:28 PM
  #21  
Extremo78's Avatar
Extremo78
Thread Starter
Driver School Candidate
 
Joined: Mar 2011
Posts: 10
Likes: 0
From: Ontario
Default

Originally Posted by Acrad35751
That is around 71 inch lbs or 6 ft lbs
Thanks!

In tightening the bars with the tool ,I realized that 8 Nm is much tighter than I thought it would be.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
onelt1
1Gen GS300 Classifieds (91-97)
2
08-17-15 04:39 PM
Bigrahizzl
Maintenance
7
05-14-11 01:15 PM
GSteg
2Gen GS430 / 400/ 300 Classifieds (98-05)
9
01-15-11 10:56 PM
racerman33
Wheels and Tires Classifieds
4
03-25-10 05:52 PM



Quick Reply: WTB: GX460 Crossbars



All times are GMT -7. The time now is 01:05 AM.