naser075

so i just saw that only my drivers side illuminated door sill is working ,
is that normal or should they all be working??? is it a hard removal to change the led light or any lighting that needs to be changed

thank you

Acrad

Just the fronts light up and they should both be on. Not sure if LED is serviceable... one may need to solder in a new one if bulb is actually out.

naser075

oh my god ,... thank u so much

golfeus

Hi,
Was the illuminated door sill part of the premium GX or do all the 2nd generation illuminate? I just bought a used 2013 last Dec with 75k miles and neither sill has ever lite up. Pulled off the drivers door sill to replace it due to multiple dents and I don't see any led or bulb of any kind although there's a plug I had to undo. Please see attachment. Is this some type of light or just a terminator?
I appreciate any help with this!

Acrad

EDIT: Probably the plug to add them.

https://www.toyotapartsdeal.com/oem/...0980-11002.htm

Premium option

GX Brochures

2010
http://www.lexus.com/documents/broch...X-Brochure.pdf

2011
http://www.lexus.com/documents/broch...X-Brochure.pdf

2012
http://www.lexus.com/documents/broch...X-Brochure.pdf

2013
http://www.lexus.com/documents/broch...X-Brochure.pdf

2014
http://www.lexus.com/documents/broch...X-Brochure.pdf

2015
http://www.lexus.com/documents/broch...X-Brochure.pdf

2016
http://www.lexus.com/documents/broch...X-Brochure.pdf

2017
http://www.lexus.com/documents/broch...X-Brochure.pdf

2018
https://www.lexus.com/documents/broc...X-Brochure.pdf


Part Numbers:

Black-Right
67910-60080-C0

Black Left
67920-60080-C0

Sepia-Right
67910-60080-E0

Sepia-Left
67920-60080-E0

tecman

Plastic blank. I pulled up my door sills and didn't notice that but I was not looking for it.

golfeus

I was afraid that was the case!
Thanks : )

GB2011GX

All you people punching up all these gadgets and trinkets that are only on the Premium models are depressing me. JK
Have fun with your gadgets!

golfeus

That's the truth!!!

Acrad

I know this is an old thread but is basic connector there with the terminator plug above on all non-equipped models?

My memory on this is a little cloudy. It seems from early posts that all 10-13 have connector but only the "equipped" '14+ Luxury have connector.

Seanzky

I removed my driver's door sill to remove a piece of Weathertech window visor that had broken off and fallen in there --I was afraid of rattling so it was important that I remove it. I did NOT see any connectors, just a loom that was neatly wrapped/taped. I slightly damaged the scuff plate itself and was considering replacing it with illuminated ones. The metal part separated from the plastic (one plastic tab had broken off), had 4 small dents, etc. I'll just leave it on until there are more dents and scratches and I'll take a look again. The truck is still too brand new.

MrTorgue

Both front door sills seem to have a connector that connects to the factory unlit sill plates. Does this mean both of my doors have the capability of illuminated door sill plates? If so do they make rear illuminated sills I could wire up to the door open sensor button or interior dome light?

Acrad

Can you take a meter to what is there to see if you have 12V?

nuclearn8

The front sill plates are plug n play option. Every GX has the connectors, just plug the parts in, walla.
No idea on the rear sill plates... let us know what you find out.

Acrad

It should be easy to wire up but not sure about all being pre-wired…. OP back in ‘13 didn’t find connectors on their ‘14 Premium