HVAC - Air Conditioning / Heating - Troubleshooting, Questions, Info
#257
I honestly am not sure since I don't have a reader, but I'll ask my shop to take a look as well. So far it seems like maybe its just normal? I counted yesterday its more like 15 seconds to blowing. It does blow cold, its just like it takes a second to get going. It seemed strange taking that long hence the question of "is this normal?"
#259
Mine also waits 10-15 seconds for the ac to start blowing. I think it's waiting for the evaporator to get cool. I know it waits for the coolant temp to warm up some before the heater comes on in cold weather. I sometimes wish it had a "just give me whatever ya' got, now!" button.
#261
what does the AUTO button do?
does it change the temperature based on the outside or cabin temps. or does it just auto adjust based on the temp displayed on the console?
when it was 65 a few days ago, when i hit auto (70), it was blowing slightly warmer than ambient air through (recirculating on).
then for the past two days it’s been over 85 and when i hit it, after approximately ten to fifteen minutes, my fingers start to get numb. (recirculating on and still set to 70)
when it was 65 a few days ago, when i hit auto (70), it was blowing slightly warmer than ambient air through (recirculating on).
then for the past two days it’s been over 85 and when i hit it, after approximately ten to fifteen minutes, my fingers start to get numb. (recirculating on and still set to 70)
#262
Super Moderator
#263
Huh, trying to figure out why a neural net is needed to control the interior temp - maybe there is some useful nonlinear mapping required for using sensor data, other than current interior temp, for smoother/more stable delivery of air/temp.
#264
Super Moderator
I've noticed some oddities over the years when my 3rd zone HVAC was set to an extreme temperature from the front cabin settings.
#265
Seems like complexity overkill. Maybe some internal team got bored and then marketing thought it might be useful to signal how sophisticated the system was. Or some exec got excited about it and pushed it.
#266
Instructor
I’m basically comfortable with 70 degrees for summer and winter so I keep it on 70 Auto, which means I’m the summer it blows AC to keep 70 and the winter heat to keep 70. This way the fan turns up/down based on the needed auto adjustment. My son and father both have ES350’s and they like to manually adjust fan and temps. To each their own.
#267
I’m basically comfortable with 70 degrees for summer and winter so I keep it on 70 Auto, which means I’m the summer it blows AC to keep 70 and the winter heat to keep 70. This way the fan turns up/down based on the needed auto adjustment. My son and father both have ES350’s and they like to manually adjust fan and temps. To each their own.
I’m basically comfortable with 70 degrees for summer and winter so I keep it on 70 Auto, which means I’m the summer it blows AC to keep 70 and the winter heat to keep 70. This way the fan turns up/down based on the needed auto adjustment. My son and father both have ES350’s and they like to manually adjust fan and temps. To each their own.
its currently 60, and tonight on my way home, when i hit auto it wasnt blowing cold air, yet this morning on my way in it was freezing.
i dont have an issue or complaining, just want to understand whats going on.
#268
Only time I had issues with AC blowing high continuously in my 2013, I was fiddling with it and turned the rear AC off the day before, then had it on auto. I assume it was trying to cool the whole interior and my hands and ears got frosty. Once I turned everything back on, it cooled and settled on the lower preset fan speed.
#269
Super Moderator
Just a feeling of mismatched air temps from 3rd zone over my shoulder from second row roof vents but mainly caused by extreme temp settings and those vents directed forward. Probably more to be expected than an oddity. Frankly I just set it and forget it.
If you think the temp readout isn't quite on for temp there is a way with TS to adjust it to more closely match temp you think it is by 2-3 degrees IIRC.
If you think the temp readout isn't quite on for temp there is a way with TS to adjust it to more closely match temp you think it is by 2-3 degrees IIRC.
#270
Intermediate
I just wish it had a 'sync' button for ( at least ) the front (dual) zone control!