MarkVII

Well, I've had the GX for just over a week Ordered LEDs from VLEDs- had great luck with them on my 4Runner. To start the LED upgrade I did all passenger compartment lighting including:

- dome / maps lights
- vanity mirror lights
- door/puddle lights







Then did the running board lights

nebrou

Which LED lights did you use? These seem very bright

MarkVII

The two front map lights and vanity lights are: WHITE HIGH POWER 360° 14 LED 5K NATURAL WHITE https://www.vleds.com/shop-bulb-numb...194-14-ll.html

All the others are: WHITE HIGH OUTPUT 360° 26 LED 5K NATURAL WHITE https://www.vleds.com/shop-bulb-numb...194-26-ho.html

cb1111

Might I recommend NOT upgrading the vanity mirror lights to daylight LEDs (or LEDs at all). Your significant other will not be happy.

MarkVII

Hmmm, good point.

bbqsoup

These are bright wow!

My puddle lights are not too bright so thinking of getting new bulbs. I think I have Yorkim LEDs in them.

nebrou

Are there any replacement for LEDs in the pedal area ?

Ramacher

iTrader: (1)

Only if you want to solder on the replacements. They're small LEDs and I broke off the one in the passenger footwell area and need to solder it back on :/

bbqsoup

Not many replaced these as they are not common bulb.

nebrou

I have become expert in soldering after doing alot of mods

Any link to what LED to buy to solder to?

Pangoo

Lol is it too blindingly bright for the vanity mirror lights when done ? OP how many bulbs did you end up using in all ?

Mistaken

Damn those are bright!

MarkVII

Sooo, since I have a few amber VLED 194s from my 4Runner, my next step was changing the side parking/marker lights. Much to my surprise- I cannot for the life of me find the socket. What am I missing?

tecman

front or rear with this or both?

MarkVII

I was attempting the front side markers . .