Starting my 2014 GX build!
05-14-24, 09:20 AM
#137
Pit Crew
Thread Starter
First winter in CO adventures with Big Lex ❄️
Getting ready with a half cord of wood:
Installed an electric hoist from Harbor Freight to hold the RTT for the winter:
Spent our anniversary in Nederland:
Took a solo trip to Moab:
Got stuck in a snowbank for the first time:
And saw the new LC and GX at the Denver Auto Show:
And since spring is here, went on our first camping trip of the year - McInnis Canyons Nat'l Conservation Area. Also explored Rattlesnake Arches.
feat. her new shoes - Method 316's:
And only a few minor maintenance bits - new struts for the rear lift glass and swapping out the leaky worm clamps on the radiator hoses with OEM.
Getting ready with a half cord of wood:
Installed an electric hoist from Harbor Freight to hold the RTT for the winter:
Spent our anniversary in Nederland:
Took a solo trip to Moab:
Got stuck in a snowbank for the first time:
And saw the new LC and GX at the Denver Auto Show:
And since spring is here, went on our first camping trip of the year - McInnis Canyons Nat'l Conservation Area. Also explored Rattlesnake Arches.
feat. her new shoes - Method 316's:
And only a few minor maintenance bits - new struts for the rear lift glass and swapping out the leaky worm clamps on the radiator hoses with OEM.
The following users liked this post:
Luthor14 (06-14-24)
Noice!
06-12-24, 06:07 PM
#139
Pit Crew
Thread Starter
Replaced my lower intermediate steering shaft to fix a clattering sound from the steering column when off-roading. Wrote up a DIY guide for anyone having a similar issue.
I also finally took care of getting my recalled Ironman UCAs replaced! New LCAs go on next month.
I also finally took care of getting my recalled Ironman UCAs replaced! New LCAs go on next month.
The following users liked this post:
Luthor14 (06-14-24)
Thread
Thread Starter
Forum
Replies
Last Post