2022 GX Discussion - Black Line Edition in black and Nori Green Pearl/ AA CP 10.3"
#481
Driver School Candidate
I have successfully changed all lights to LEDs on my 2022 GX without hyper blinking or error codes. Total cost: $112.
Very satisfied with the result. Please note that I used white LEDs, besides the turn signals. I tried blue and yellow for the running boards, and doors, but ended up going with the white. White LEDs just work, and do not cause any dislikes.
Front & Rear Turn Signals: Size 7440, Qty 4
https://auxito.com/products/7440-5kg...32094967595101
Reverse Light: Size T15, Qty 2
Interior Dome Lights, Door Lights, Running Board Lights: All same Size T10, Qty 14
Very satisfied with the result. Please note that I used white LEDs, besides the turn signals. I tried blue and yellow for the running boards, and doors, but ended up going with the white. White LEDs just work, and do not cause any dislikes.
Front & Rear Turn Signals: Size 7440, Qty 4
https://auxito.com/products/7440-5kg...32094967595101
Reverse Light: Size T15, Qty 2
Interior Dome Lights, Door Lights, Running Board Lights: All same Size T10, Qty 14
The following 3 users liked this post by LexV8:
#482
Driver School Candidate
I have successfully changed all lights to LEDs on my 2022 GX without hyper blinking or error codes. Total cost: $112.
Very satisfied with the result. Please note that I used white LEDs, besides the turn signals. I tried blue and yellow for the running boards, and doors, but ended up going with the white. White LEDs just work, and do not cause any dislikes.
Front & Rear Turn Signals: Size 7440, Qty 4
https://auxito.com/products/7440-5kg...32094967595101
Reverse Light: Size T15, Qty 2
https://www.amazon.com/gp/product/B0...0?ie=UTF8&th=1
Interior Dome Lights, Door Lights, Running Board Lights: All same Size T10, Qty 14
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
Very satisfied with the result. Please note that I used white LEDs, besides the turn signals. I tried blue and yellow for the running boards, and doors, but ended up going with the white. White LEDs just work, and do not cause any dislikes.
Front & Rear Turn Signals: Size 7440, Qty 4
https://auxito.com/products/7440-5kg...32094967595101
Reverse Light: Size T15, Qty 2
https://www.amazon.com/gp/product/B0...0?ie=UTF8&th=1
Interior Dome Lights, Door Lights, Running Board Lights: All same Size T10, Qty 14
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
#483
I have successfully changed all lights to LEDs on my 2022 GX without hyper blinking or error codes. Total cost: $112.
Very satisfied with the result. Please note that I used white LEDs, besides the turn signals. I tried blue and yellow for the running boards, and doors, but ended up going with the white. White LEDs just work, and do not cause any dislikes.
Front & Rear Turn Signals: Size 7440, Qty 4
https://auxito.com/products/7440-5kg...32094967595101
Very satisfied with the result. Please note that I used white LEDs, besides the turn signals. I tried blue and yellow for the running boards, and doors, but ended up going with the white. White LEDs just work, and do not cause any dislikes.
Front & Rear Turn Signals: Size 7440, Qty 4
https://auxito.com/products/7440-5kg...32094967595101
These have been tested by others to hold more than 5min, but seem like the 2020 and newer has a more sensitive system, no flasher relay, only a load support for trailer instead of flasher module
If you can, please try them for longer time and check how your setup work
#485
Thanks, I finally got in touch with someone who is searching for me. I just want a base model GX so the blackline is perfect, although I'd prefer a lighter interior color. Looks like I may be up to a 3 month wait since I don't want to pay a mark up.
#486
So it's the base premium. Add the BlackLine edition costs of $3835 plus destination $1075 and then anything the dealer adds to the truck (cross bars, floor liners...). I was fortunate that I only had door edge guards, floor mats and tonneau cover added to the truck.
Good luck
The following users liked this post:
Nickk6 (01-05-22)
#487
Hi All
I reached out to Sirius LED in regards to my observations that hey start to hyper flash, and they responded within a day and with no hiding technical details of how they work (description not technical drawing ) which in my eye is a massive plus from a supplier/vendor, unfortunately they basically confirmed what I found by testing them;
Here is he reply
"Sorry to hear that. The RLS/RLK has a built-in resistor which will generate a massive amount of heat while the light is on for a while. In order to control heat dissipation, there is a smart driver to control the power of the bulb. The smart driver till allow the bulb to work full power for 2 mins and dealing this time the led bulb can bypass hyper flashing detection of the flashing relay. After 2 mins the smart will put the bulb on low power mode to let the bulb cool down and you will get hyper flashing. if you want full-time resistor led bulb you need to attach add-on resistor on the turn signal wire to do that. We recommend customers use this led bulb for only turn signal application."
Keep above in mind as most likely all LED's with no inline resistor behaves similar
Again, I'm happy with their reply, not hiding that they know it will potentially hyper flash after longer usage, also there is a user "GXBOB" I think, had a youtube video where he tested them for 5 min no issue, but that was a pre 2020, so it could be that 2020 --> are more sensitive to load resistance.
I reached out to Sirius LED in regards to my observations that hey start to hyper flash, and they responded within a day and with no hiding technical details of how they work (description not technical drawing ) which in my eye is a massive plus from a supplier/vendor, unfortunately they basically confirmed what I found by testing them;
Here is he reply
"Sorry to hear that. The RLS/RLK has a built-in resistor which will generate a massive amount of heat while the light is on for a while. In order to control heat dissipation, there is a smart driver to control the power of the bulb. The smart driver till allow the bulb to work full power for 2 mins and dealing this time the led bulb can bypass hyper flashing detection of the flashing relay. After 2 mins the smart will put the bulb on low power mode to let the bulb cool down and you will get hyper flashing. if you want full-time resistor led bulb you need to attach add-on resistor on the turn signal wire to do that. We recommend customers use this led bulb for only turn signal application."
Keep above in mind as most likely all LED's with no inline resistor behaves similar
Again, I'm happy with their reply, not hiding that they know it will potentially hyper flash after longer usage, also there is a user "GXBOB" I think, had a youtube video where he tested them for 5 min no issue, but that was a pre 2020, so it could be that 2020 --> are more sensitive to load resistance.
The following users liked this post:
DSMinATL (01-11-22)
#491
1st trip to the desert in the new GX. Mostly just sand washes. When it got technical and we needed to navigate over some boulders I thought about the low front bumper and the running boards then just turned turned it around and found an easier route.
2022 GX Black Line, 1K miles, first trip to the desert.
2022 GX Black Line, 1K miles, first trip to the desert.
Last edited by NiteDipper; 01-13-22 at 12:24 AM.
#492
1st trip to the desert in the new GX. Mostly just sand washes. When it got technical and we needed to navigate over some boulders I thought about the low front bumper and the running boards then just turned turned it around and found an easier route.
2022 GX Black Line, 1K miles, first trip to the desert.
2022 GX Black Line, 1K miles, first trip to the desert.
The following users liked this post:
NiteDipper (01-13-22)
#493
The following users liked this post:
Piney1 (01-22-22)