When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Nothing on my '10. I had it set that one press of unlock will unlock all doors. Not sure if that
makes a different. I heard unlock click when I pressed it twice. But the third click did nothing
Yeah... been there... vendor was certain it wouldn't work but that is what gave me live data. You can also reset TPMS sensors and view live air pressure in tires. I'm running a 64-bit version of software on an old Windows laptop I had sitting around. It also allows for an easy way to get navigation into diagnostic mode without having to toggle the HIDs. You could also view the TPMS IDs if one wanted to order pre-programmed sensors for another set of rims (winter set for example). No need to look over the shoulder of your tire guy.
Looks like I'm a bit late to cancel the order. I'll see if it do what I need when it arrived and will get the new version eventually.
I found an old XP laptop with 32 bit. Does the new 2.0.4 work better with 64-bit or the same?
That should work fine for a laptop & OS. The cable you have on order should work fine for customizations stuff. You will likely run into communication errors though when you get into engine troubleshooting or live data areas
About 8 minutes in to see what program looks like.
Yeah... been there... vendor was certain it wouldn't work but that is what gave me live data. You can also reset TPMS sensors and view live air pressure in tires. I'm running a 64-bit version of software on an old Windows laptop I had sitting around. It also allows for an easy way to get navigation into diagnostic mode without having to toggle the HIDs. You could also view the TPMS IDs if one wanted to order pre-programmed sensors for another set of rims (winter set for example). No need to look over the shoulder of your tire guy.
I have a 2013 GX460, what cable do I need? And does it come with the software or do I have to get the software separately? How does this compare to Carista?
This is similar cable to what I am using. It will arrive with software as well. This can troubleshoot all systems attached to the CAN bus. Confirm with vendor you are getting a cable with 2.0.4 firmware. The 1.x versions were fairly limited in what I could do with system, gave me errors and couldn't do live data. Tread lightly as you can make the car do things from a diagnostic perspective it won't normally do in operation.
This is similar cable to what I am using. It will arrive with software as well. This can troubleshoot all systems attached to the CAN bus. Confirm with vendor you are getting a cable with 2.0.4 firmware. The 1.x versions were fairly limited in what I could do with system, gave me errors and couldn't do live data. Tread lightly as you can make the car do things from a diagnostic perspective it won't normally do in operation.
09-09-17, 06:41 PM
