Some upgrades to factory 23 GX460
The following 7 users liked this post by Cslaedd:
AlexDev (02-01-23),
Bob2023gx (03-07-23),
darkoozy (12-28-22),
FastTurtle (12-29-22),
gregGX (12-24-22),
and 2 others liked this post.
The following 4 users liked this post by cadman:
#7
Vinyl wrap details
Used black gloss vinyl for the chrome delete, and medium smoke for the rear tail, marker lights, and 3rd brake light. I preferred the dark chrome accents on the black line edition, and tried a light smoke on my chrome to mimic that, but the way it adheres to the shiny chrome of my luxury edition, left a weird visible adhesion ripple look, so ended up switching to the gloss black with suitable results.
The following users liked this post:
gxFlynn (03-07-23)
Trending Topics
#8
Tail lights
I don't have any nighttime shots yet. I tried light smoke, but it was barely noticeable. Medium smoke was out of stock, so I used dark for the time being. Might switch it out to a medium smoke, so during the daytime, the beautiful details of the tail lights will show through a little better. Compared to the base version, the black line & luxury tail lights have the black background to them and I want that to be a little more visible.
The following users liked this post:
gacars (01-07-23)
#9
Wheel spacers
I got the reputable 1.25" blue anodized spacers from Spidertrax to push the tires out flush with the fenders. The stock OEM stance was too narrow, and it now has a more aggressive look without going overboard.
The following users liked this post:
reypac24 (02-01-23)
#10
#11
Ride quality
#12
I installed them 2 hours after I purchased the vehicle, so don't know exactly. But ride quality is superb nonetheless. Tires at 35 psi, suspension setting on Sport. I would guess spacers would marginally increase cornering ability since your stance is wider, lowering the center of gravity.
it sure look great. Good job with the mods.