When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Here are all the parts and the install. All components that attach to the 3D printed parts are RAM "B" 1" ball.
The arm is the medium 4", they are available in different lengths, that is what I had.
EDIT: here are the STL files https://www.thingiverse.com/thing:5834824 The right hand 2 parts are printed Assembled unit Bracket installed, I used 2 sided mounting tape and it is holding great From the top, full access to the 12V plug and the top closes Installed with the medium 4" arm, the longer 6" arm would also work and position the phone higher
The cold box in the centre console is great at keeping drinks very cold and we use it all the time, but it is deep meaning cans are not easy to grab and there is a lot of wasted space. I designed a deep lower removable tray and a beverage can holder with integrated lid, this works so much better than the original plastic tray. It is designed for use with standard beverage cans, if you want to carry taller water bottles just remove the entire unit as needed. Original configuration with a simple drip tray at bottom. If the cold box does not have 4 cans they will fall over & spill The cans are very deep making them hard to grab 3D printed box that sits in the bottom and a divided can holder with integrated lid for the box Box placed in bottom of cold box Top installed Cans now easy to reach and will not fall over
IMO: A cool option not practical to add as it is plumbed into vehicle AC. I've seen spec'd on 460's from Puerto Rico and of course other markets around the world as well. Never in the 50 state US market though.
IMO: A cool option not practical to add as it is plumbed into vehicle AC. I've seen spec'd on 460's from Puerto Rico and of course other markets around the world as well. Never in the 50 state US market though.
At least from documentation standpoint was first offered in Canada for 2012 model year.
"The 2012 GX 460 Ultra Premium model now features unique alloy wheels and a cooled console box."
The 2023 Canadian Executive model still includes the Front Console Cool Box
IMO: A cool option not practical to add as it is plumbed into vehicle AC. I've seen spec'd on 460's from Puerto Rico and of course other markets around the world as well. Never in the 50 state US market though.
I don't know if it's possible, but it would be cool to see a printed version of the sunglasses holder without the mirror and adjusting it to allow bigger sunglasses to fit. I have a large head and have a hard time finding sunglasses, let alone ones that fit up there. Just an idea.
Looking into purchasing and Ender V3 at some point for my first 3d printer.
02-04-23, 08:13 AM
