Anyone here installed a Daizen Front Control Arm Bushing Kit?
#1
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I was thinking of getting the Daizen Front Control Arm Bushing Kit and OEM tie rod ends and and lower ball joints kit from TM Engineering. Just wanted to know where I can have them installed on Oahu and I'll supply the parts and pay for labor. I own a 2000 GS300 and thinking that replacing these would solve my steering shakes at 55-60MPH.
I installed brand new tires and had them rebalanced twice and want to count that method out. I'm lookiing for someone who did and know how to install this Daizen bushing kit. I heard you have to heat up the old bushings with a torch and clean the insides with a metal drill brush to clean out the remaining old melted rubber and from there the new bushing goes in easily. Let me know before I order these.
Thanks, DanozLS430
I installed brand new tires and had them rebalanced twice and want to count that method out. I'm lookiing for someone who did and know how to install this Daizen bushing kit. I heard you have to heat up the old bushings with a torch and clean the insides with a metal drill brush to clean out the remaining old melted rubber and from there the new bushing goes in easily. Let me know before I order these.
Thanks, DanozLS430
#3
![Smile](https://www.clublexus.com/forums/images/icons/icon7.gif)
DanozLS430
Last edited by DanozLS430; 11-06-07 at 10:08 AM.
#4
Master Thread Closer!!
iTrader: (33)
Join Date: Jul 2002
Location: Waipahu, Waikele, HI
Posts: 9,859
Likes: 0
Received 9 Likes
on
9 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
There's are threads on the bushing install. Should be easy if you got the time and the tools to do it. I think any mechanic can figure it out easily. Daizen provides installation instructions. With the DIY threads....there should be a problem.
Pete
Pete
#5
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
Anyone knows of a mechanic with a hydraulic press to remove the old bushings from the control arms. This is what the installation instructions said to use to remove the old bushings. The Daizen Control Arm bushing kit arrived and still looking for someone to install along with the lower ball joints and tie rods. I got all the new parts. Any info or referral to a shop or mechanic will help. This is for my 2000 GS300.
Thanks, DanozLS430
Thanks, DanozLS430
#6
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
same story here...im in the new york city area
was planning for a friend and I to tackle the bushings replacement sometime in the next two weeks, but removing the old bushings without the hydraulic press is gonna be a biotch
was planning for a friend and I to tackle the bushings replacement sometime in the next two weeks, but removing the old bushings without the hydraulic press is gonna be a biotch
Trending Topics
#8
Driver School Candidate
Join Date: Mar 2007
Location: hawaii
Posts: 24
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I know Napa in Kaimuki has a hydraulic press but the tech is there only on the weekdays. I got my strut rod bushings pressed at my cousins workplace at firestone. You could probably do this job yourself if you can take apart your suspension.
Last edited by hazian23; 12-12-07 at 06:54 PM. Reason: misspell
#10
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I found a cool and honest mechanic located near Ward Avenue who completed the installation of my GS300 (Daizen Control Arm Bushing, outer tie rods ends, lower ball joints) which I supplied the new parts. I purchased these at http://www.tmengineering.net/suspens...n/make/gs.html The mechanic's name is Ken from Pacific Automotive & Performance Center which is located at 813 Ilaniwai St. Phone 596-7732 (Next door to Chad's place LXS Hawaii)
They have a the hydraulic press to press in and out the rubber bushings and was familiar with the product. All of this took a little over 1 day to complete and price seemed very fair as he quoted me an estimate before doing any work. Ken also knocked off some labor hours with the added parts if done at the same time. I guess it's easier to install these parts at the same time when everything is coming off anyways. Now I found a mechanic I can trust to repair my LS430 if I need to.
I also had Ken replace my brake pads and resurface rotors/drums, install new front struts and do a 4 wheel alignment. Ken took some photos of the installation job as I requested and I'll put them up here as soon as he emails them to me. I am very glad I found these guys and Ken seems like a very honest and easy going mechanic who knows his stuff well. The front wheel shaking problem is no longer there and I now feel safe that it is fixed as I gave this car to my mom and brother to use. Will post pics soon.
Aloha, DanozLS430
They have a the hydraulic press to press in and out the rubber bushings and was familiar with the product. All of this took a little over 1 day to complete and price seemed very fair as he quoted me an estimate before doing any work. Ken also knocked off some labor hours with the added parts if done at the same time. I guess it's easier to install these parts at the same time when everything is coming off anyways. Now I found a mechanic I can trust to repair my LS430 if I need to.
I also had Ken replace my brake pads and resurface rotors/drums, install new front struts and do a 4 wheel alignment. Ken took some photos of the installation job as I requested and I'll put them up here as soon as he emails them to me. I am very glad I found these guys and Ken seems like a very honest and easy going mechanic who knows his stuff well. The front wheel shaking problem is no longer there and I now feel safe that it is fixed as I gave this car to my mom and brother to use. Will post pics soon.
Aloha, DanozLS430
Last edited by DanozLS430; 01-13-08 at 10:03 PM.
#11
Master Thread Closer!!
iTrader: (33)
Join Date: Jul 2002
Location: Waipahu, Waikele, HI
Posts: 9,859
Likes: 0
Received 9 Likes
on
9 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
I found a cool and honest mechanic located near Ward Avenue who completed the installation of my GS300 (Daizen Control Arm Bushing, outer tie rods ends, lower ball joints) which I supplied the new parts. I purchased these at http://www.tmengineering.net/suspens...n/make/gs.html The mechanic's name is Ken from Pacific Automotive & Performance Center which is located at 813 Ilaniwai St. Phone 596-7732 (Next door to Chad's place LXS Hawaii)
They have a the hydraulic press to press in and out the rubber bushings and was familiar with the product. All of this took a little over 1 day to complete and price seemed very fair as he quoted me an estimate before doing any work. Ken also knocked off some labor hours with the added parts if done at the same time. I guess it's easier to install these parts at the same time when everything is coming off anyways. Now I found a mechanic I can trust to repair my LS430 if I need to.
I also had Ken replace my brake pads and resurface rotors/drums, install new front struts and do a 4 wheel alignment. Ken took some photos of the installation job as I requested and I'll put them up here as soon as he emails them to me. I am very glad I found these guys and Ken seems like a very honest and easy going mechanic who knows his stuff well. The front wheel shaking problem is no longer there and I now feel safe that it is fixed as I gave this car to my mom and brother to use. Will post pics soon.
Aloha, DanozLS430
They have a the hydraulic press to press in and out the rubber bushings and was familiar with the product. All of this took a little over 1 day to complete and price seemed very fair as he quoted me an estimate before doing any work. Ken also knocked off some labor hours with the added parts if done at the same time. I guess it's easier to install these parts at the same time when everything is coming off anyways. Now I found a mechanic I can trust to repair my LS430 if I need to.
I also had Ken replace my brake pads and resurface rotors/drums, install new front struts and do a 4 wheel alignment. Ken took some photos of the installation job as I requested and I'll put them up here as soon as he emails them to me. I am very glad I found these guys and Ken seems like a very honest and easy going mechanic who knows his stuff well. The front wheel shaking problem is no longer there and I now feel safe that it is fixed as I gave this car to my mom and brother to use. Will post pics soon.
Aloha, DanozLS430
Thank.
#13
Driver School Candidate
Join Date: Jan 2008
Location: Hawaii
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
my mechanic friend installed the daizen bushing on my 92 sc300. he said the hardest part was taking out the old bushing since it has to be 100% free of debris before pressing in the new bushing. it's very time consuming drilling out old bushings... you'll have to torch it out. he didn't have a torch handy so he asked his neighbor, kaimuki midas, to burn out the stubborn pieces.
there was an improvement in steering response but you'll have the sacrifice some undampened road vibration coming thru the steering wheel. also, be sure to use lots of the lube that came with the bushings. gl.
there was an improvement in steering response but you'll have the sacrifice some undampened road vibration coming thru the steering wheel. also, be sure to use lots of the lube that came with the bushings. gl.
#14
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
my mechanic friend installed the daizen bushing on my 92 sc300. he said the hardest part was taking out the old bushing since it has to be 100% free of debris before pressing in the new bushing. it's very time consuming drilling out old bushings... you'll have to torch it out. he didn't have a torch handy so he asked his neighbor, kaimuki midas, to burn out the stubborn pieces.
there was an improvement in steering response but you'll have the sacrifice some undampened road vibration coming thru the steering wheel. also, be sure to use lots of the lube that came with the bushings. gl.
there was an improvement in steering response but you'll have the sacrifice some undampened road vibration coming thru the steering wheel. also, be sure to use lots of the lube that came with the bushings. gl.
DanozLS430...
#15
Driver School Candidate
Join Date: Jan 2008
Location: Hawaii
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
sounds good to me.... hydraulic press is the way to go, if available.
ken worked on my truck a while back and also did the alignment on my lifted 4runner a couple of months ago. very nice and personable guy... even though he was very busy, he took the time to go over some of my future suspension options.
ken worked on my truck a while back and also did the alignment on my lifted 4runner a couple of months ago. very nice and personable guy... even though he was very busy, he took the time to go over some of my future suspension options.