Hybrid Technology Unique topics related to the ES300h model hybrid drivetrain and other features/options found only on the ES300h. Please use the main 7ES forum for discussion about shared components with other seventh generation ES models.

I finally have an Analog Speedometer for my 2019 ES300h

Thread Tools
 
Search this Thread
 
Old 06-14-19 | 05:44 AM
  #16  
Bichon's Avatar
Bichon
Super Moderator
 
Joined: Dec 2005
Posts: 5,293
Likes: 276
From: NJ
Default

Originally Posted by jfz219
0-100 or 0-120 mph scale would be more legible.
The 0-120 mph scale is the one that makes the most sense, given that the car is electonically limited to a top speed of 112 MPH. (source: https://pressroom.toyota.com/release...sheet.download )

Originally Posted by kalel2127
0-70 might be more appropriate for hybrid owners
Now you're just being mean!
Old 06-15-19 | 03:23 AM
  #17  
Freds430's Avatar
Freds430
Pole Position
 
Joined: Jun 2010
Posts: 2,598
Likes: 1,174
From: NC
Default

Originally Posted by chromedome
It's available on all ES hybrids including the 2012-2017 6th gen model and the current model. It's buried in the custom settings in the driver display.

The point of accelerating moderately is to hit the engine's sweet spot for power and fuel consumption. I'm doing this based on the Camry hybrid's BSFC figures. Once you've hit your target speed, lift off the throttle to kill the engine and cruise on battery.
Need help. Went into the meter settings and the only thing I saw was to change so the tach is on all the time.
Old 06-16-19 | 08:28 AM
  #18  
TrentYoung's Avatar
TrentYoung
Rookie
 
Joined: Jun 2019
Posts: 30
Likes: 5
From: Arizona
Default

The HUD is great... however, coming from a 2016 Corvette Stingray with HUD I sure miss being able to adjust it to the right and left so it would be more centered.
Old 06-16-19 | 02:30 PM
  #19  
RJLsES's Avatar
RJLsES
Pit Crew
 
Joined: Jun 2019
Posts: 223
Likes: 27
From: TX
Default

Originally Posted by TrentYoung
The HUD is great... however, coming from a 2016 Corvette Stingray with HUD I sure miss being able to adjust it to the right and left so it would be more centered.
One thing with the HUD on my 2019 ES350 F-Sport is that the display is not level with the horizon -- the left side is about 5 degrees lower than the right side.

I wonder if a Lexus tech could go under the dash and tweak the display so that it will display level.
The following users liked this post:
TrentYoung (06-16-19)
Old 06-16-19 | 04:03 PM
  #20  
mikemu30's Avatar
mikemu30
Lexus Test Driver
 
Joined: Jul 2017
Posts: 8,203
Likes: 2,574
From: NJ
Default

Originally Posted by RJLsES
One thing with the HUD on my 2019 ES350 F-Sport is that the display is not level with the horizon -- the left side is about 5 degrees lower than the right side.

I wonder if a Lexus tech could go under the dash and tweak the display so that it will display level.
You can adjust that in settings.
Old 06-16-19 | 07:12 PM
  #21  
TrentYoung's Avatar
TrentYoung
Rookie
 
Joined: Jun 2019
Posts: 30
Likes: 5
From: Arizona
Default

In the 2019 300h... it can only be adjusted up or down. Not right or left. Hope I am wrong!
Old 06-17-19 | 11:50 AM
  #22  
mikemu30's Avatar
mikemu30
Lexus Test Driver
 
Joined: Jul 2017
Posts: 8,203
Likes: 2,574
From: NJ
Default

Originally Posted by TrentYoung
In the 2019 300h... it can only be adjusted up or down. Not right or left. Hope I am wrong!
I think that is correct. I was thinking of the angle per the last poster question which I'm pretty sure can be adjusted. the left side is about 5 degrees lower than the right side.
The following users liked this post:
TrentYoung (06-17-19)
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
yungicon
RC - 1st Gen (2015-present)
10
03-23-18 07:36 AM
dmanmtl
IS - 3rd Gen (2014-present)
31
09-10-16 02:22 PM
Sfrt
RC - 1st Gen (2015-present)
27
10-14-14 05:23 PM
corradoMR2
RX - 3rd Gen (2010-2015)
13
09-29-13 08:34 PM
boone
GS - 4th Gen (2013-2020)
22
08-01-12 12:16 PM



Quick Reply: I finally have an Analog Speedometer for my 2019 ES300h



All times are GMT -7. The time now is 03:10 PM.