In Dash Install
#1
Driver School Candidate
Thread Starter
Join Date: Jul 2008
Location: Georgia
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
In Dash Install
I have a 2003 IS300, i want to install a indash dvd player into my car.
I was wondering do i have to buy a new radio plate for the car; and if so what is a website that i can go to buy one.
I want to install an in-dash similar to this:
I was wondering do i have to buy a new radio plate for the car; and if so what is a website that i can go to buy one.
I want to install an in-dash similar to this:
#2
Lead Lap
iTrader: (1)
Yes you will need a new one. The JDM double din dash kit is the way to go. It's Toyota OEM, so it fits and matches perfectly. I don't know if vendor nigelchow still has them, but he was selling them new for $65 shipped. You can also try Carson Toyota. Here is a pic of mine
If you have heated seats, you could extend the wires for the driver's button and the track on/off button. These two buttons would be relocated to the empty slot and a coin holder to the left of your steering wheel.
Another option would be to carefully cut the lower portion of the face plate off, and keep the panel with the heat/track buttons in place.
If you have heated seats, you could extend the wires for the driver's button and the track on/off button. These two buttons would be relocated to the empty slot and a coin holder to the left of your steering wheel.
Another option would be to carefully cut the lower portion of the face plate off, and keep the panel with the heat/track buttons in place.
Thread
Thread Starter
Forum
Replies
Last Post
charlie@jd
GX - 1st Gen (2003-2009)
37
01-05-13 03:30 PM
saelee39
Lexus Audio, Video, Security & Electronics
1
05-10-06 12:22 PM
MadMaxxNA
Lexus Audio, Video, Security & Electronics
1
08-17-05 08:20 AM