need help with V1 install please
05-02-02, 03:41 PM
#1
Driver School Candidate
Thread Starter
Join Date: May 2002
Location: NC
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
need help with V1 install please
Does anyone have advice about direct wiring a V1 in an IS300? Which wire to I tap? Anyone have pictures or a website? Thanks,
05-02-02, 07:44 PM
#2
Rookie
Join Date: May 2002
Location: Virginia
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
I hope it's okay to link to another site. I didn't see anything specifically about doing this in the registration rules.
Take a look at:
http://www.is300.net/forum/viewtopic...303713&forum=4
It should tell you everything you need.
Take a look at:
http://www.is300.net/forum/viewtopic...303713&forum=4
It should tell you everything you need.
05-03-02, 11:01 PM
#3
Forum Administrator
iTrader: (2)
Carolina IS -
Not sure what part of NC you are in... If you end up not wanting to do it yourself and are in Charlotte, PM me and I'll point you to a couple of shops who have done a couple of GSs and an NSX with V1-s. Think the cost was about $20.
Not sure what part of NC you are in... If you end up not wanting to do it yourself and are in Charlotte, PM me and I'll point you to a couple of shops who have done a couple of GSs and an NSX with V1-s. Think the cost was about $20.
Thread
Thread Starter
Forum
Replies
Last Post