Plasma Booster Dyno Graph; No article yet.
#2
Pole Position
On future charts can you please post with the horizontal graph being RPM? The ones that have MPH or secs really aren't as illustrative for the purposes of understanding the power production of the engine. Thanks.
#3
While Static911 probably didn't have a choice as to what the dyno people gave him, I have to agree with Mr. Johnson. This is hard to really judge w/o RPM.
Any chance of going back to the dyno folks an asking if they can print a charge with rpm?
Bob
Any chance of going back to the dyno folks an asking if they can print a charge with rpm?
Bob
#4
Driver School Candidate
Join Date: Feb 2002
Location: LA, CA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Where is the real dyno?
I would like to see the RPM dyno to make judgement on this product. The seconds dyno leaves way too many questions open. (and room for... ERROR)
I bet the RPM dyno is not something favorable to Igntion Solutions... but truth must come out as is...
I bet the RPM dyno is not something favorable to Igntion Solutions... but truth must come out as is...
#5
Static911 (Ethan) I talked with Steve at Ignition Sloutions and he said he was giving you all of the dyno sheets for all of the runs. If that is true will you be posting them. Steve said that the reason that they did the dyno runs in sec. is so that they could see the increase in exceleration for 0-60. he said that they well not clame big HP gains and that the booster was not susposto give large HP gains but a quicker acceleration at lower RPM's. (or that is my understanding of the product.) If that is the case then the dyno shows this and if you are willing to give up 2-3 RWHP to get there quicker than this sounds like a good product. I do not have one to test myself so I would be real intrested in seeing the dyno sheets if you get them. the quality of the posted dyno sheet is hard to make out. is there any way you could fax me the sheets?
Thanks
Henry
Thanks
Henry
#6
Driver School Candidate
Join Date: Feb 2002
Location: LA, CA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
New dyno available.
Looks really sharp. Also noticed some additional dyno on their web site for 330i & Mustang.
http://www.is300.net/forum/viewtopic...482&forum=2&16
http://www.ignitionsolutions.com/tec...Ci/index.shtml
http://www.is300.net/forum/viewtopic...482&forum=2&16
http://www.ignitionsolutions.com/tec...Ci/index.shtml
Thread
Thread Starter
Forum
Replies
Last Post
juanmedina
IS F (2008-2014)
21
03-30-16 04:20 AM