deal or not
#1
Rookie
Thread Starter
Join Date: Jan 2010
Location: tx
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
deal or not
Hi I'm Luis "gohan" my wife just go me 01 is300 for my b-day the has under 82k on it she got it for 6k but the car have a problem it only happens when I floor it the like jerks and I don't know y need help
Trending Topics
#8
Rookie
Thread Starter
Join Date: Jan 2010
Location: tx
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
#9
Moderator
iTrader: (3)
Join Date: Jun 2007
Location: West Virginia soon to be Virginia
Posts: 819
Likes: 0
Received 1 Like
on
1 Post
no CEL? hrmmm, perhaps you should try something to intentionally trip the CEL to make sure they didnt just take out the bulb....pull the wire off the MAF sensor that should do it
also i did a DIY guide for the plugs if you need to refer to it here:
http://www.isfanatics.com/forums/showthread.php?t=8002
also i did a DIY guide for the plugs if you need to refer to it here:
http://www.isfanatics.com/forums/showthread.php?t=8002
#11
Rookie
Thread Starter
Join Date: Jan 2010
Location: tx
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
#12
Moderator
iTrader: (3)
Join Date: Jun 2007
Location: West Virginia soon to be Virginia
Posts: 819
Likes: 0
Received 1 Like
on
1 Post
i personally say ngk iridium ix, thats what i got and thats pretty much standard, i almost went bosch platinum fusion cause thats what i threw in my RX and they were GREAT!! but other people complained about em so i didnt want to chance it ya know
#14
Rookie
Thread Starter
Join Date: Jan 2010
Location: tx
Posts: 53
Likes: 0
Received 0 Likes
on
0 Posts
no CEL? hrmmm, perhaps you should try something to intentionally trip the CEL to make sure they didnt just take out the bulb....pull the wire off the MAF sensor that should do it
also i did a DIY guide for the plugs if you need to refer to it here:
http://www.isfanatics.com/forums/showthread.php?t=8002
also i did a DIY guide for the plugs if you need to refer to it here:
http://www.isfanatics.com/forums/showthread.php?t=8002
#15
you go to autozone, or o reillys or an autopart store and ask for them to scan your Codes on your car.. they will tell you what your problem is.. Or you can buy a scan tool yourself.