llllllllll

iTrader: (1)

What spacers do people use if you are slammed with stock wheels? I don't know what kind of spacers I will need with my stock wheels on. And what does IS look like slammed with stock wheels? I tried to do a search but didn't see anything....

Lazy

iTrader: (2)

I think it was a 15 or 20. someone has a slammed IS on stocks.. Post it! I saw ur car at the tastea meet the other week!

nguminh

iTrader: (2)

Try looking up IS3_FTW's car he had a picture of his car on stock wheels and air bagged down but it was super tucked and it depends how low you're going to be on stock but a 20 should be good.

VIPJOSH

hope this helps. this is just pictures with my phone. i haven't put any spacers on yet but was planning to put some on the rear. if u haven't don't any fender mods you should only need 15 mm if you tucking rims n tires, 20 mm if your just want it flush.


*** ps the car looks lowered more in the back but that is only because it is so tucked in and has -3 camber. i am also on a lil bigger tire too

spazzyfry

Don't know if this constitutes as "slammed", but it's good for me. I am running Ichiba 15mm spacers up front and 20mm spacers in the rear with Tein S-Tech springs. Could probably even get by with a 25mm in the rear with some rolling.

Shake1

Is this slammed enough? I'll probably crank the coilovers down a tad bit more to get closer to VIPJosh's height. No spacers.

IS3_FTW

iTrader: (3)

Be hold, the answer with pics

http://my.is/forums/f95/flush-set-up-stock-rims-380627/

IS3Vietboi

dam u weren't lieing we r like twins.... haha

VIPJOSH

^^^ haha ya but u have way better head lights

IS3_FTW

iTrader: (3)

That is so wrong in so many ways.

Gotta get my head out of the gutter

IS3Vietboi

hahaha i never really thought about that..... hahaha

ritz

my car without spacers



i still want to go lower

spazzyfry

I wish I could go lower... Even with me going into my driveway at a mega angle, I still scrape my factory exhaust tip just about every time.

llllllllll

iTrader: (1)

My car is about the same height.
Maybe a little higher, but I can lower it another inch and a half if I want (tein coilovers for the win!!)
But I am already scraping on a lot of stuff and I don't want my ride to be too stiff/bouncy.
Also I am afraid of how low it will be when I have my sideskirts put on - on tuesday.

I'm new to the whole spacers thing.... Will my factory lugs snap if I put 20mm spacers on rear and 15mm on front?

Mv350

iTrader: (23)

get ichiba v2's and youll have nothing to worry about.