Crank position sensor wire colors
#1
Crank position sensor wire colors
Changing my water pump and I broke the wires for the CPS connector. Broke them right at the base so i can't tell which color wire went in which spot. I fixed the connector already with old honda parts I had laying around. I have a Red and a White coming off the sensor, and a Black/White and Blue at the connector.
Can anyone confirm which wires to connect? Experience is telling me Black/White and White go together but I want to make sure. I'm scouring the manuals I have, but can't find anything useful.
Anyone know what kind of signals I should be seeing on the wires? something like 5V on the blue with the key turned?
Thanks
here's a bad picture:
Can anyone confirm which wires to connect? Experience is telling me Black/White and White go together but I want to make sure. I'm scouring the manuals I have, but can't find anything useful.
Anyone know what kind of signals I should be seeing on the wires? something like 5V on the blue with the key turned?
Thanks
here's a bad picture:
#2
Actually I found this picture and based on the position of the connector it looks like the Blue and White would need to connect. And then the Black/White and Red would connect.
i'm gonna try it out.....
i'm gonna try it out.....
Thread
Thread Starter
Forum
Replies
Last Post