PLEASE HELP... Audio questions that have not found answers to!!
#1
Driver School Candidate
Thread Starter
Join Date: Mar 2014
Location: WI
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
PLEASE HELP... Audio questions that have not found answers to!!
I have read every post and used every question on google that has something to do with the TYTO-01. I have everything I need and am ready to go.. I recently installed the front 6.5 and tweeters with JBL 628 and the tweeters are something else. I bought a pioneer double din Avh-x3500bhs and hifonics amp and the (tyto-01) on accident I believe.. I plan on replacing the rear speakers with some JBL928's before install. Are there any suggestions or answers to whether or not I can use the tyto-01 and the amp together or if I can bypass one or the other. Anything would help at this point. If I missed a thread to where this was posted, I apologize send me the thread and Ill read myself..
#2
I just install my audio without any harness... I have two amps one for lows and the other for highs haven't touched the the tweeters yet. (Installed it myself last night 02 is300) I ran a remote wire and three monster av cables (comes in 2s) for rear,front and subs to radio. I took my radio (aftermarket radio) harness connected straight to the cars harness.
Colors: from left are the car harness from stock radio.<< Right: after market radio harness>>
Blue/yellow is constant 12v wire: connect to yellow harness
Grey is your switch 12v wire: connect to red harness wire
Brown is your Ground wire: connect to black harness wire
Sorry and the remote that I ran with the av cables is connected to the blue/white harness cable to power on and off your amps..
Kenwood dnx7140, 2 12s kicker and two kicker amps
Still confused? Watch this video and good luck buddy
Colors: from left are the car harness from stock radio.<< Right: after market radio harness>>
Blue/yellow is constant 12v wire: connect to yellow harness
Grey is your switch 12v wire: connect to red harness wire
Brown is your Ground wire: connect to black harness wire
Sorry and the remote that I ran with the av cables is connected to the blue/white harness cable to power on and off your amps..
Kenwood dnx7140, 2 12s kicker and two kicker amps
Still confused? Watch this video and good luck buddy
Last edited by Black1129; 03-06-14 at 02:35 PM. Reason: Left out the remote wire on original reply
Thread
Thread Starter
Forum
Replies
Last Post
Metlupass2
GS - 2nd Gen (1998-2005)
9
03-03-07 12:41 PM