Turn off those damn seatbelt alarms!?!?
#166
Lexus Fanatic
iTrader: (9)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
1. press the start button twice , foot off the brake (dash lights come on)
2. Press the trip reset button couple of times until the ODO is displayed (not trip A or B)
3. press the start button so the car is in the LOCK (OFF) position
4. unbuckle the driver's seatbelt if it was buckled.
5. press the engine start button -ON position- again press the start button twice. when the dash lights comes on, press and hold the trip reset button and count a slow 15 seconds. (you may have to try 20 seconds)
6. while still holding the trip reset button, buckle the driver's side seatbelt.
7.and the odometer display should read "b ON" or "b OFF". toggle the beep OFF with the trip reset.
8. the process should be completed when you unbuckle or turn off the car.
2. Press the trip reset button couple of times until the ODO is displayed (not trip A or B)
3. press the start button so the car is in the LOCK (OFF) position
4. unbuckle the driver's seatbelt if it was buckled.
5. press the engine start button -ON position- again press the start button twice. when the dash lights comes on, press and hold the trip reset button and count a slow 15 seconds. (you may have to try 20 seconds)
6. while still holding the trip reset button, buckle the driver's side seatbelt.
7.and the odometer display should read "b ON" or "b OFF". toggle the beep OFF with the trip reset.
8. the process should be completed when you unbuckle or turn off the car.
Last edited by GiantsFan; 11-01-09 at 11:55 PM.
#173
#176
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
wait so technically i have to do it twice then? once in the Driver to turn off the driver side and then another time for passenger side?
according to the whole thread so far everyone seemed to just do it once... so does that mean they most likely only disabled the drivers side??
according to the whole thread so far everyone seemed to just do it once... so does that mean they most likely only disabled the drivers side??
![Confused](https://www.clublexus.com/forums/images/smilies/confused.gif)
#177
2IS OG
iTrader: (21)
![Default](https://www.clublexus.com/forums/images/icons/icon1.gif)
^No, you only need to do it once. Procedure A reads:
It then goes on to mention that it covers both driver and passenger buzzers at the beginning of the procedures:
Javier
Seat Belt Buzzer ON/OFF setting (Procedure "A")
The buzzer ON/OFF setting, which is a setting of the
buzzer function of the combination meter, can disable
the driver and front passenger side seat belt buzzers.
The buzzer ON/OFF setting, which is a setting of the
buzzer function of the combination meter, can disable
the driver and front passenger side seat belt buzzers.
(a) Driver and front passenger side seat belt buzzers
#178