Aftermarket Wheel Owners Post Your Setup
08-31-10, 05:06 AM
#2105
Driver School Candidate
Join Date: Aug 2010
Location: Cyprus (Europe)
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Lexus IS220d (Europe model) with Aftermarket setup
Hello,this is my new setup:
Stock information:
17" RWD:
Front: 225/45/17, 17x8 +45mm
Rear: 245/45/17, 17x8, +45mm
Please fill in the following aftermarket information:
Lexus IS model: IS220d 2007 (Europe model)
Wheel Make & Model:EXE Konkave
Wheel Size (diameter and width):19x8,5 Front and 19x9,5 Rear
Wheel Offset Front:+37
Wheel Offset Rear:+43
Tire Make and Model:Goodyear F1 Assymetric
Tire Size Front:225-35-19
Tire Size Rear:255-35-19
Suspension mods:TEIN Luxury H-Tech
Amount of drop:0,8" Rear and 1" Front
I Have this setup for 9 months now, and have NO rubbing. The Tein H-Tech springs are much better than the stock.Overall, the car is PERFECT than with the stock setup.
PS: I want custom 73mm center caps for my alloy wheels.
__________________
07 IS220d Dark Grey + Front and Rear spoiler with F-sport logos
Stock information:
17" RWD:
Front: 225/45/17, 17x8 +45mm
Rear: 245/45/17, 17x8, +45mm
Please fill in the following aftermarket information:
Lexus IS model: IS220d 2007 (Europe model)
Wheel Make & Model:EXE Konkave
Wheel Size (diameter and width):19x8,5 Front and 19x9,5 Rear
Wheel Offset Front:+37
Wheel Offset Rear:+43
Tire Make and Model:Goodyear F1 Assymetric
Tire Size Front:225-35-19
Tire Size Rear:255-35-19
Suspension mods:TEIN Luxury H-Tech
Amount of drop:0,8" Rear and 1" Front
I Have this setup for 9 months now, and have NO rubbing. The Tein H-Tech springs are much better than the stock.Overall, the car is PERFECT than with the stock setup.
PS: I want custom 73mm center caps for my alloy wheels.
__________________
07 IS220d Dark Grey + Front and Rear spoiler with F-sport logos
10-25-10, 01:18 AM
#2109
Driver School Candidate
Join Date: Oct 2010
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I needed new tyres, so figured I may as well get some new shoes while I'm at it.
Wheels are Katana GTM BM in a +45 offset front and rear, 8.5" front 9.5" rear.
Tyres are Kumho KU31s - 235/35/19 up front and 275/30/19 out the back
These are only interim rims till I find something I really like that's available in Aus, something along the lines of the Forgestar F14 or Axis Elite.
And yes, before anyone says, I know, it needs a drop! I'm trying to decide between the Tein S.Tech or the Eibach Pro kit...
Slight concave look which I don't mind
Wheels are Katana GTM BM in a +45 offset front and rear, 8.5" front 9.5" rear.
Tyres are Kumho KU31s - 235/35/19 up front and 275/30/19 out the back
These are only interim rims till I find something I really like that's available in Aus, something along the lines of the Forgestar F14 or Axis Elite.
And yes, before anyone says, I know, it needs a drop! I'm trying to decide between the Tein S.Tech or the Eibach Pro kit...
Slight concave look which I don't mind
01-17-11, 07:54 PM
#2111
Driver School Candidate
Join Date: Jan 2011
Location: OR
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
tire stretch
whats up everyone, I recently got these staggered 20' DPE rims they are used so the fronts are 20x9 with 245/35/20 and rears are 20x10 with 255/35/20 tires. I lowered the car with H&R springs, tried the rims on and found out that they all rub the fenders so I got the fenders rolled on rears it's a little bit better but still i think they will rub ones I hit the bomb ,so I am thinking of getting the tires stretched but not sure what size I should go with. any suggestions?
01-23-11, 04:36 PM
#2112
Rookie
Join Date: Jan 2011
Location: WA
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
Drag DR-37 with Hankook on H&R Lowering Springs
I just got these put on in addition to a set of H&R lowering springs. The springs gave me a 2inch drop (center of hub to bottom of fender).
The wheels are Drag DR-37 with Hankook Ventus Evo V12 tires. I wanted the wheels with a +22 offset but they did not have em.
Front: 19x8.5 et40 225/35/19
Rear: 19x9.5 et40 245/35/19
Factory 18s:
New Rims:
Once I get a chance to wash her and when the sun is out I will get better full shots.
The wheels are Drag DR-37 with Hankook Ventus Evo V12 tires. I wanted the wheels with a +22 offset but they did not have em.
Front: 19x8.5 et40 225/35/19
Rear: 19x9.5 et40 245/35/19
Factory 18s:
New Rims:
Once I get a chance to wash her and when the sun is out I will get better full shots.
Last edited by dasmokedog; 01-23-11 at 04:40 PM.
01-24-11, 09:14 PM
#2113
Driver School Candidate
Join Date: Jan 2011
Location: NM
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
hey everyone, i got some wheels and just wanted to see what tire size you all think i should get.
here is my info
07 is250
stock height
the wheels
20" Axis Shine
20x9 Front +15 Offset
20x10 Rear +20 Offset
any help would be greatly appreciated.
thanks
here is my info
07 is250
stock height
the wheels
20" Axis Shine
20x9 Front +15 Offset
20x10 Rear +20 Offset
any help would be greatly appreciated.
thanks
01-24-11, 09:41 PM
#2114
whats up everyone, I recently got these staggered 20' DPE rims they are used so the fronts are 20x9 with 245/35/20 and rears are 20x10 with 255/35/20 tires. I lowered the car with H&R springs, tried the rims on and found out that they all rub the fenders so I got the fenders rolled on rears it's a little bit better but still i think they will rub ones I hit the bomb ,so I am thinking of getting the tires stretched but not sure what size I should go with. any suggestions?
