IS 350 Stalled this morning...
#31
Lead Lap
Join Date: May 2006
Location: Ottawa,Ontario
Posts: 688
Likes: 0
Received 0 Likes
on
0 Posts
Does this problem still exist or do I have a lemon?
Anybody had there engine CPU updated to prevent stalling? I had my IS350 for 2 months now and it stalled 3 times. All first start from not using it the previous day. When I talked to a mechanics at Lexus he had no clue.
Last edited by phatboyc; 07-24-06 at 08:14 AM.
#36
has the cpu update for the 250 come out? what about new cars delivered in july.. would they have been updated??
do dealers install cpu updates during predelivery check up?? no stalls for me 500miles
the people that had stalls can you give updates on the situation ?? thanks
do dealers install cpu updates during predelivery check up?? no stalls for me 500miles
the people that had stalls can you give updates on the situation ?? thanks
#42
Originally Posted by daveortega
My 350 is up to 2,500 miles over 2 months. The car has stalled a few times. If this turns out to be a widespread issue (and it looks like it is), this will hurt the IS's quality ranking.
#43
Lexus Champion
Join Date: Feb 2006
Location: San Diego, CA
Posts: 2,553
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by brentweiss
have you taken it to the dealer? if so what did they say? i will be getting the 07 is350 but i dont like hearing about brand new cars stalling..........
#45
Tech Info Resource
iTrader: (2)
"Found fuel saturation of engine oil with engine fuel long term correction of 15%, with no DTC recorded."
Toyota TCCS has the ability to apply a correction to the base fuel maps for the engine. I have some documentation and training materials describing this in detail, but from what I can tell, this forum isn't quite that technical. If you really want the details on fuel trim, PM me.
Essentially what this means is the ECM is adjusting the basic fuel calculations to 15% more fuel than it would normally expect, and no DTC (diagnostic trouble code) has been set. No DTC means all the sensors seem to be within normal operating parameters, and no broken wires have been detected by the ECM/ECUs.
On top of this, it seems that excess fuel is going into the oil. That's generally extremely bad for a lot of reasons. It's hard to imagine this happening because of a software error. I might take a look at this on TIS.
As of today, there is nothing in any Special Service Campaign bulletin about this. If they had identified a problem and a fix, it would be there.
Toyota TCCS has the ability to apply a correction to the base fuel maps for the engine. I have some documentation and training materials describing this in detail, but from what I can tell, this forum isn't quite that technical. If you really want the details on fuel trim, PM me.
Essentially what this means is the ECM is adjusting the basic fuel calculations to 15% more fuel than it would normally expect, and no DTC (diagnostic trouble code) has been set. No DTC means all the sensors seem to be within normal operating parameters, and no broken wires have been detected by the ECM/ECUs.
On top of this, it seems that excess fuel is going into the oil. That's generally extremely bad for a lot of reasons. It's hard to imagine this happening because of a software error. I might take a look at this on TIS.
As of today, there is nothing in any Special Service Campaign bulletin about this. If they had identified a problem and a fix, it would be there.