Xenon Depot HID 4300k Install (56k beware!!)
#64
Driver School Candidate
Join Date: Feb 2007
Location: earth
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
I was told that there may be this possibility because the OEM halogens are on 55W whereas the HIDs are on 35W.
I am thinking of fitting the HID in my car but am concerned about this failure message appearing.
#65
Lexus Test Driver
iTrader: (2)
Shaolin, did you get any "Low Beam/Bulb Failure" warning message from the onboard computer after you fitted the XD HID into the car?
I was told that there may be this possibility because the OEM halogens are on 55W whereas the HIDs are on 35W.
I am thinking of fitting the HID in my car but am concerned about this failure message appearing.
I was told that there may be this possibility because the OEM halogens are on 55W whereas the HIDs are on 35W.
I am thinking of fitting the HID in my car but am concerned about this failure message appearing.
This is the first time I heard about the low beam/bulb failure. Other people with XD have this issue?
#67
Please update the pictures...I just got my kit from XD. (overnight shipping was awsome). I'm kinda scare to pursue the installation of the kit. Any additional help will be very very appreciated!
I'm from Sac, CA so anybody in the Nor Cal is offering help, I'm willing to drive within 1 1/2 hrs time.
Thank you!
I'm from Sac, CA so anybody in the Nor Cal is offering help, I'm willing to drive within 1 1/2 hrs time.
Thank you!
#69
Lexus Test Driver
iTrader: (2)
Hopefully i will be able to figue out how to post pic or i will ask another member to post it for me.
#73
Pole Position
iTrader: (1)
Join Date: Oct 2006
Location: Ladera Ranch, CA
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
here are some pics of my xenon depot 4300K HID kit.
*** Ballast mounting on driver side ***
*** Wires going to headlight (i sealed the inside of the gromet with silicon to reduce the chance of condesation) ***
*** Ballast mounting on passenger side ***
*** Wires going to headlight, sealed w/ silicon ***
*** The red lines illustrates where the wires were ran from ballast to headlight ***
*** Ballast mounting on driver side ***
*** Wires going to headlight (i sealed the inside of the gromet with silicon to reduce the chance of condesation) ***
*** Ballast mounting on passenger side ***
*** Wires going to headlight, sealed w/ silicon ***
*** The red lines illustrates where the wires were ran from ballast to headlight ***
Last edited by TR3XX; 03-02-07 at 05:58 PM.
#74
Pole Position
iTrader: (1)
Join Date: Oct 2006
Location: Ladera Ranch, CA
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
Night time pictures...
With camera flash...
Without camera flash
Without fog lights
Light beam...Does anyone know why my lights have this dip in it? It seems to be coming from my driver side headlight (see read arrow) Any ideas on how to fix this?
With camera flash...
Without camera flash
Without fog lights
Light beam...Does anyone know why my lights have this dip in it? It seems to be coming from my driver side headlight (see read arrow) Any ideas on how to fix this?
#75
^^^ One of your light on "Driver" Side is tilted further down than the other side....... There's a screw that you can mess with to adjust... There was a thread about this by "Technique"!